Daily Papers

Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain--cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain--cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

Looped Transformers have drawn growing attention because looping improves multi-step reasoning and increases the executed depth of a model without adding parameters. They achieve this by reusing a stack of L layers for N loops. However, increasing the loop count N not only destabilizes training but also shifts the best hyperparameters, so they must be searched again for every loop count. Inspired by Depth-μP (Yang et al., 2024), which multiplies each residual branch by L^{-1/2} for depth L so that a learning rate tuned on a shallow untied network transfers to a deep one, we study how the residual branches and the learning rate should scale with the loop count N. We find that loops cannot simply be treated as extra depth, because the loops share weights. At initialization, distinct layers add nearly uncorrelated increments to the residual stream, so their sum grows as L, whereas a shared layer adds positively correlated increments at every loop, so their sum grows linearly in N. For a single layer looped N times, we show in the infinite-width limit that multiplying the residual branch by 1/N and keeping the learning rate independent of N is the only parameterization with both a stable forward pass and maximal residual-stream updates. We then generalize the analysis to a stack of L distinct layers looped N times to obtain a parameterization we call Loop-μP, in which the loop factor 1/N combines with the depth factor L^{-1/2}. Empirically, we find in language modeling that the base learning rate tuned on the smallest model stays best under Loop-μP for loop counts up to 8 and executed depths up to 384 layers. These results make Loop-μP a practical recipe for scaling looped Transformers.

Repeating a small block of middle layers increases a language model's effective inference depth without adding parameters or generating extra tokens, and recent work shows that this latent recurrence improves reasoning. However, two design choices limit these gains. Each iteration sees only the previous output and cannot directly access earlier computations. Moreover, a fixed loop count wastes depth on easy inputs while leaving hard ones with too little computation. We introduce RecurTrace, which addresses both limitations using the loop's own trajectory. Specifically, Loop Memory Attention lets each looped layer attend to its own states from previous iterations along the loop-time axis, so the model can revisit earlier computations instead of relying on the latest state alone. A halting head then reads the loop state and predicts whether to continue, with supervision from an oracle that identifies when additional depth still reduces loss. In a controlled MathQA comparison on the same looped backbone, RecurTrace achieves 56.9% accuracy with an average of 2.0 loops, exceeding the best fixed loop depth by 2.2 points at matched compute. By comparison, ACT and PonderNet collapse to one loop, and CALM reaches only 54.1% with 5.6 loops, while the stronger LoopUS-Conf and TaH-Mismatch baselines reach 55.3% at 3.2 loops and 55.7% at 2.1 loops. Finally, RecurTrace improves generation accuracy over same-budget fine-tuned baselines at 0.6B, 1.7B, 4B, and 8B, with the gain growing with model size from 0.6 to 3.4 points.

Despite significant progress in robotics and embodied AI in recent years, deploying robots for long-horizon tasks remains a great challenge. Majority of prior arts adhere to an open-loop philosophy and lack real-time feedback, leading to error accumulation and undesirable robustness. A handful of approaches have endeavored to establish feedback mechanisms leveraging pixel-level differences or pre-trained visual representations, yet their efficacy and adaptability have been found to be constrained. Inspired by classic closed-loop control systems, we propose CLOVER, a closed-loop visuomotor control framework that incorporates feedback mechanisms to improve adaptive robotic control. CLOVER consists of a text-conditioned video diffusion model for generating visual plans as reference inputs, a measurable embedding space for accurate error quantification, and a feedback-driven controller that refines actions from feedback and initiates replans as needed. Our framework exhibits notable advancement in real-world robotic tasks and achieves state-of-the-art on CALVIN benchmark, improving by 8% over previous open-loop counterparts. Code and checkpoints are maintained at https://github.com/OpenDriveLab/CLOVER.

A latent recurrent language model applies a shared block of layers repeatedly, so one checkpoint can trade inference compute for accuracy by changing the loop count. At one loop, however, such models typically fall well short of a non-recurrent model of the same size, a one-loop tax that makes a separate non-recurrent model the better choice whenever latency matters. We present Elastic Latent Recurrence (ELR), a recipe for training looped language models without this tax. At one loop, an ELR model costs the same to serve as a non-recurrent model of the same size and, trained on the same data, reaches similar accuracy. Each additional loop then buys more accuracy for more inference compute. Three choices make this work: a gated state update with a learned step size, loop counts mixed within each optimizer update, and conditioning each pass on its loop index and budget. The first two preserve one-loop accuracy, and the third lowers loss at every additional loop. Mixed depths can be introduced late in pretraining to limit the added training cost, and with zero-initialized conditioning added at the switch, this late schedule reaches lower loss than mixed-depth training from scratch. In MoE models, reusing first-loop expert routes on later loops cuts mixed-depth update time by 11.7% with no measurable change in accuracy. At inference, keeping only the last loop's attention KV cache holds attention KV memory at its one-loop level while retaining most of the gain from additional loops. On 4B dense and 30B-A3B MoE hybrid models, ELR at one loop is 0.52 points below and 1.04 points above its matched baseline on a ten-task average, and four loops add 7.25 and 4.75 points. Carried through post-training, the recipe yields Koi-4B, a single checkpoint that scores an estimated 18 on the Artificial Analysis Intelligence Index at one loop, matching Qwen3.5-4B, and 29 at four loops.

In this paper, we argue that looped Transformers need their own residual connections to prevent performance degradation as the number of iterations grows. We observe that increasing loop iterations can reduce reasoning accuracy: noisy state updates overwrite correct intermediate deductions and even undo completed solutions. This leaves subsequent iterations to recover lost information from an already degraded representation: once an error arises in an earlier loop, often as a result of long-range propagation through the recurrence, later loops find it difficult to correct. In this paper, we introduce InfiLoop, a loop-native residual connection that learns which past computations to retain and how much to accept from each new update. InfiLoop combines content-based weighting with learned temporal decay to maintain a running summary of recurrent states. An exact streaming recurrence keeps its persistent aggregation memory constant as the loop count grows. The resulting adaptive update suppresses unreliable proposals and preserves useful intermediate states. Across extensive reasoning tasks, a 7M-parameter InfiLoop model outperforms existing recursive architectures, reaching 97.9% exact accuracy on Sudoku-Extreme, and 13.6% pass@2 on ARC-AGI-2. Notably, on Sudoku-Extreme, InfiLoop continues to improve with test-time looping beyond 20,000 effective steps, showing that added depth translates directly into stronger reasoning. Our code is available at https://github.com/pixeli99/InfiLoop.

We introduce Dory1.0-4B, a 4-billion-parameter looped (latent-recurrent) language model with elastic depth: a single checkpoint serves different inference compute budgets. Dory1.0-4B is built on a normalized Transformer (nGPT) backbone with interleaved sliding-window and full-attention layers, organized into an input block, a shared recurrent block, and an output block. At inference, the recurrent block can be applied a variable number of times. We pre-trained Dory1.0-4B on 6 trillion tokens. The first 4.5 trillion tokens were trained in NVFP4, and additional pre-training then extended the context length to 256K tokens. Next, we post-trained the model using Supervised Fine-Tuning (SFT) and Reinforcement Learning with Verifiable Rewards (RLVR), with a difficulty-aware loop curriculum that routes harder prompts to deeper loops. Increasing the loop count improves accuracy, with the largest gains on coding, agentic, and long-context benchmarks. With two or more loops, Dory1.0-4B outperforms larger models such as Qwen3.5-9B, Gemma 4 12B, and Gemma 4 26B-A4B on average across 12 benchmarks. Looping also makes Dory1.0-4B more token-efficient on agentic benchmarks: with four loops, it generates 1.3-2.5x fewer tokens than with one loop, as the extra computation is spent in latent space rather than on longer outputs. To reduce memory during looping, Dory1.0-4B caches keys and values only from the last loop, keeping its KV-cache footprint equal to that of a non-looped model at any loop count while retaining most of the accuracy gains. We open-source the BF16, MXFP8, NVFP4, and GGUF quantized checkpoints.

Looped Transformers have attracted substantial attention as a parameter-efficient approach to increasing computational depth through repeated application of shared Transformer blocks. However, their practical advantages over conventional Transformers remain under debate: each additional loop incurs another Transformer pass and requires caching another set of KV states, causing inference FLOPs and KV-cache memory to grow continuously with loop depth. This overhead becomes particularly severe at large loop counts and long context, preventing the parameter efficiency of Looped Transformers from translating into practical inference efficiency. In this paper, we find that much of the additional computation and storage introduced by looping is redundant. As recurrence proceeds, state changes become increasingly concentrated on a small subset of tokens; attention-output differences are dominated by a sparse and stable subset of key columns; and KV residuals between adjacent loops become progressively more amenable to low-bit quantization. Building on these observations, we introduce FlashLoop, a training-free inference framework that reduces cross-loop redundancy through token-sparse updates, sparse attention, and KV-residual quantization. Across several Looped Transformers models, FlashLoop delivers lossless accuracy while achieving up to 1.64times end-to-end speedup and up to 6times KV-cache memory reduction, substantially improving the practicality of scaling Looped Transformers to greater computational depths and longer context.

Uniform diffusion language models (UDLMs) generate text by iteratively denoising sequences of ordinary vocabulary tokens, any of which may be corrupted and subsequently revised. During training, UDLMs must denoise from a context that may itself be unreliable, whereas masked diffusion language models (MDLMs) always condition on a clean context. This challenging training objective makes UDLMs more FLOP-intensive to train than MDLMs, but it yields stronger downstream reasoning performance. Recently, selective looping, which recursively applies a few early Transformer layers within each denoising step, has been shown to improve training efficiency in MDLMs under an iso-FLOP budget. We investigate looping in UDLMs while keeping the training objective and sampler unchanged. We find that looping significantly improves training efficiency: looped UDLMs reach the validation NLL of a non-looped UDLM trained on about 0.5 trillion tokens with up to 2.8x fewer training FLOPs on OpenWebText and 3.3x fewer on FineWeb-Edu. We also find that, at a matched NFE budget, looped UDLMs reach up to 9.8% lower generation perplexity than the non-looped UDLM, with most gains achieved at moderate loop counts. Finally, we study different loop-count distributions and find that sampling smaller loop counts more frequently during training improves inference efficiency: on downstream tasks, this strategy uses 12% fewer loops than uniform loop-count sampling without degrading accuracy.

We present CART (Context-Anchored Recurrent Transformer), a parameter-efficient language model that reuses a single shared core block R times across depth. Unlike prior looped transformers that recompute key-value tensors at every iteration, CART computes K and V once from a multi-layer prelude and has the recurrent core cross-attend to those frozen tensors via multi-head latent attention. A learned Linear Time-Invariant (LTI) gate keeps the recurrence stable: its spectral radius settles in a narrow band (rho in [0.79, 0.83]) across all 36 fully-trained configurations. We evaluate CART on single consumer GPUs in two stages: a 64-configuration screen at 3,000 steps, then 36 configurations (P=6, R in {6,8,10}, three seeds) trained for 30,500 steps (~1B tokens). Two patterns hold across widths d in {256,512,768,1024}: prelude depth P dominates loop count R, and the Stage-1 ranking of R reverses at full training (R=6 becomes best at d>=512). At the binding d=1024 parameter-parity test, CART does not beat a parameter-matched dense baseline, losing by 1-2% at stored-parameter parity and by ~10% at effective-parameter parity. Diagnostic ablations split the effective-parameter gap into ~5% from weight sharing and a residual ~5% from the heterogeneous prelude/anchor/core/coda framing; the recurrent-core machinery (hyper-connections, LTI gate, loop-index embedding) is individually vestigial. Variable-R inference degrades on both sides of the trained R, a negative result for test-time depth scaling under this recipe.

Looped transformers reuse a shared block of layers to increase computational depth without increasing the number of trainable parameters. They are trained with backpropagation through time (BPTT). To save training compute, BPTT is often truncated to the last few loops, but truncation yields biased gradients that may weaken the benefit of looping. In this work, we study the value of truncation in looped transformer training in a systematic way: we jointly vary model size, training tokens, and forward and backward loop counts across nearly 600 training runs and fit a unified scaling law that captures the effects of looping and truncation through effective parameters. Despite the training-compute savings of truncation, our fitted law favors full BPTT when forward and backward loop counts are jointly optimized. In matched-compute runs, full BPTT through fewer loops consistently outperforms truncated settings of the same compute. The law further shows that at fixed model size, the compute-optimal loop count and training-token budget both grow with compute. When model size is also free, the law identifies two fully trained loops as the best looped setting. Experimentally, this setting achieves lower validation loss than the compute-optimal non-looped model with about 27% fewer non-embedding parameters and only 8% more training compute.

Looped Transformers scale sequential computation by applying a compact stack of physical blocks for multiple rounds, increasing unrolled depth without increasing stored parameters. This reuse changes the residual-scaling problem: in an untied Transformer, each residual branch receives and applies its own parameter update, whereas in a looped Transformer one shared update aggregates gradients from repeated visits and is read back by those same visits in the next linearized forward pass. We formalize this tied-depth effect through a first-order perturbation bound controlled by a visit-alignment coefficient κ_R. The bound recovers the DeepNorm exponent when visits decorrelate, but in the conservative aligned regime it requires the exponent to increase from 1/4 to 1/2 as loop count grows at fixed physical depth. The resulting method, DeepLoop, keeps the Post-LN DeepNorm architecture and sets α=(2N)^{1/2} and β=(8N)^{-1/2} for unrolled depth N. On GPT-style looped language models at GPT-2 small and GPT-2 medium scale, DeepLoop is neutral when no physical block is revisited and improves validation loss and downstream accuracy once recurrent depth is activated. These results show that stable recurrent depth requires residual scaling rules that account for parameter visits, not only nominal layer count.

Open-loop imitation learning has advanced modern autonomous driving policy architectures, but closed-loop deployment remains vulnerable to policy-induced distribution shift. Existing post-training paradigms exhibit fundamental trade-offs: closed-loop RL fine-tuning provides grounded feedback from executed actions but is constrained by the sparsity of informative events, whereas counterfactual fine-tuning provides dense supervision over candidate futures but inherits bias from imperfect future estimates. We introduce Counterfactual-to-Interactive Reinforcement Fine-Tuning (CRAFT), an on-policy framework that formulates closed-loop post-training as proxy-residual optimization. CRAFT uses group-normalized counterfactual advantages as a dense proxy for real closed-loop advantages and aligns this proxy with the closed-loop world through grounded residual correction from interaction-critical events. To stabilize adaptation, CRAFT regularizes the online policy toward an EMA teacher via asymmetric KL self-distillation. Theoretically, CRAFT decomposes the real closed-loop policy gradient into proxy and residual terms under the same visited-state distribution, reducing residual variance with an aligned proxy while mitigating proxy bias through grounded residual approximation. Empirically, CRAFT achieves the strongest closed-loop gains on Bench2Drive across hierarchical planning, vision-language-action, and vocabulary-scoring architectures. Ablations, scaling behavior, stability analyses, and transfer results further validate the complementary roles of dense counterfactual proxy and grounded residual correction. Project page: https://currychen77.github.io/CRAFT.

Counterfactual reasoning, a hallmark of intelligence, consists of three steps: inferring latent variables from observations (abduction), constructing alternatives (interventions), and predicting their outcomes (prediction). This skill is essential for advancing LLMs' causal understanding and expanding their applications in high-stakes domains such as scientific research. However, existing efforts in assessing LLM's counterfactual reasoning capabilities tend to skip the abduction step, effectively reducing to interventional reasoning and leading to overestimation of LLM performance. To address this, we introduce executable counterfactuals, a novel framework that operationalizes causal reasoning through code and math problems. Our framework explicitly requires all three steps of counterfactual reasoning and enables scalable synthetic data creation with varying difficulty, creating a frontier for evaluating and improving LLM's reasoning. Our results reveal substantial drop in accuracy (25-40%) from interventional to counterfactual reasoning for SOTA models like o4-mini and Claude-4-Sonnet. To address this gap, we construct a training set comprising counterfactual code problems having if-else condition and test on out-of-domain code structures (e.g. having while-loop); we also test whether a model trained on code would generalize to counterfactual math word problems. While supervised finetuning on stronger models' reasoning traces improves in-domain performance of Qwen models, it leads to a decrease in accuracy on OOD tasks such as counterfactual math problems. In contrast, reinforcement learning induces the core cognitive behaviors and generalizes to new domains, yielding gains over the base model on both code (improvement of 1.5x-2x) and math problems. Analysis of the reasoning traces reinforces these findings and highlights the promise of RL for improving LLMs' counterfactual reasoning.

Machine unlearning has gained increasing attention in recent years, as a promising technique to selectively remove unwanted privacy or copyrighted information from Large Language Models that are trained on a massive scale of human data. However, the emergence of Large Reasoning Models (LRMs), which emphasize long chain-of-thought (CoT) reasoning to address complex questions, presents a dilemma to unlearning: existing methods either struggle to completely eliminate undesired knowledge from the CoT traces or degrade the reasoning performances due to the interference with the reasoning process. To this end, we introduce Counterfactual Unlearning through iterative Preference Optimization (CiPO), a novel framework that redefines unlearning as the targeted intervention of the CoT reasoning in LRMs. More specifically, given a desired unlearning target answer, CiPO instructs LRMs to generate a logically valid counterfactual reasoning trace for preference tuning. As the LRM adjusts to the counterfactual trace, CiPO iteratively updates the preference learning data to increase the discrepancy from the original model. This iterative loop ensures both desirable unlearning and smooth optimization, effectively mitigating the dilemma. Experiments on challenging benchmarks demonstrate that CiPO excels at unlearning, completely removing knowledge from both the intermediate CoT steps and the final answer, while preserving the reasoning abilities of LRMs.

Looped language models separate computational depth from parameter count by repeatedly applying the same transformer block. Adapting these models requires a shared update that remains effective as hidden states evolve throughout the recurrent computation. Our empirical analysis reveals a pronounced late-loop bias in standard low-rank adaptation (LoRA): the shared update is more effective at later loop positions. This imbalance motivates training shared updates under varying combinations of their applications. Randomly omitting adapter applications alone, however, does not improve task performance; it reduces expected update strength during training while leaving inference unchanged. We introduce Loop Dropout, which couples stochastic masking of adapter applications with inverse-survival rescaling to preserve expected update strength and promote effective adaptation across loops. Extensive experiments demonstrate improved mathematical reasoning across model sizes, adapter ranks and training recipes, with benefits extending to general instruction tuning and code generation. Loop Dropout outperforms existing LoRA variants and adapter regularizers, while further analysis shows stronger early-loop adaptation. Every backbone loop remains active, and inference applies the adapter at all loops using standard LoRA without additional trainable parameters or inference computation.

While large-scale neural language models, such as GPT2 and BART, have achieved impressive results on various text generation tasks, they tend to get stuck in undesirable sentence-level loops with maximization-based decoding algorithms (e.g., greedy search). This phenomenon is counter-intuitive since there are few consecutive sentence-level repetitions in human corpora (e.g., 0.02\% in Wikitext-103). To investigate the underlying reasons for generating consecutive sentence-level repetitions, we study the relationship between the probabilities of the repetitive tokens and their previous repetitions in the context. Through our quantitative experiments, we find that 1) Language models have a preference to repeat the previous sentence; 2) The sentence-level repetitions have a self-reinforcement effect: the more times a sentence is repeated in the context, the higher the probability of continuing to generate that sentence; 3) The sentences with higher initial probabilities usually have a stronger self-reinforcement effect. Motivated by our findings, we propose a simple and effective training method DITTO (PseuDo-RepetITion PenalizaTiOn), where the model learns to penalize probabilities of sentence-level repetitions from pseudo repetitive data. Although our method is motivated by mitigating repetitions, experiments show that DITTO not only mitigates the repetition issue without sacrificing perplexity, but also achieves better generation quality. Extensive experiments on open-ended text generation (Wikitext-103) and text summarization (CNN/DailyMail) demonstrate the generality and effectiveness of our method.

Recently, researchers have uncovered that neural retrieval models prefer AI-generated content (AIGC), called source bias. Compared to active search behavior, recommendation represents another important means of information acquisition, where users are more prone to source bias. Furthermore, delving into the recommendation scenario, as AIGC becomes integrated within the feedback loop involving users, data, and the recommender system, it progressively contaminates the candidate items, the user interaction history, and ultimately, the data used to train the recommendation models. How and to what extent the source bias affects the neural recommendation models within feedback loop remains unknown. In this study, we extend the investigation of source bias into the realm of recommender systems, specifically examining its impact across different phases of the feedback loop. We conceptualize the progression of AIGC integration into the recommendation content ecosystem in three distinct phases-HGC dominate, HGC-AIGC coexist, and AIGC dominance-each representing past, present, and future states, respectively. Through extensive experiments across three datasets from diverse domains, we demonstrate the prevalence of source bias and reveal a potential digital echo chamber with source bias amplification throughout the feedback loop. This trend risks creating a recommender ecosystem with limited information source, such as AIGC, being disproportionately recommended. To counteract this bias and prevent its escalation in the feedback loop, we introduce a black-box debiasing method that maintains model impartiality towards both HGC and AIGC. Our experimental results validate the effectiveness of the proposed debiasing method, confirming its potential to disrupt the feedback loop.

Trader-facing dynamic fees are increasingly proposed for automated market makers (AMMs), but historical data do not identify how order flow would respond: trader-facing fees do not vary, trader types are latent, and a replayed tape is not a sequential decision environment. We therefore construct a minimal closed-loop simulator in which the missing signal exists by construction: two constant-product pools repriced by an equilibrium-inspired dynamic-fee rule, fee-sensitive noise flow, and closed-form CEX--AMM arbitrage. Equilibrium is used as a closure principle, not as an object the trader learns. Against a tuned benchmark ladder of schedule, planning, lookahead, and tabular policies, a small DQN is the only evaluated valid policy whose paired improvement over tuned one-step routing excludes zero. On a reserved final block of 1{,}000 seeds with completion forced to 1.0 for every policy, it reduces implementation shortfall under every tested intra-step ordering, by 13.3bps of order notional under the pre-specified agent-last ordering, and the edge is concentrated in, and learned from, dynamic-fee environments: under constant fees the paired difference is indistinguishable from zero. The result is model-conditioned counterfactual evidence about execution control in AMMs, not evidence about historical traders, equilibrium play, or deployable profit.

We present Loopie, the most powerful looped Transformer to date. The Loopie series consists of two Mixture-of-Experts (MoE) models: a 20B-parameter model with 2B active parameters and a 6Bparameter model with 0.6B active parameters. Looped Transformers have long faced a challenge: given an N-fold increase in pre-training compute, increasing the parameter count by a factor of N usually outperforms looping a model N times. Loopie addresses this challenge. Extensive ablation studies, including comparisons with a vanilla 30B-A3B model, show that Loopie substantially outperforms vanilla Transformer baselines trained with the same compute budget. Our novel post-training pipeline equips Loopie with strong reasoning abilities. At the 2025 IMO and IPhO, Loopie achieves gold-medal performance without tools.

While generative AI is now widespread and useful in society, there are potential risks of misuse, e.g., unconsciously influencing cognitive processes or decision-making. Although this causes a security problem in the cognitive domain, there has been no research about neural and computational mechanisms counteracting the impact of malicious generative AI in humans. We propose DecNefGAN, a novel framework that combines a generative adversarial system and a neural reinforcement model. More specifically, DecNefGAN bridges human and generative AI in a closed-loop system, with the AI creating stimuli that induce specific mental states, thus exerting external control over neural activity. The objective of the human is the opposite, to compete and reach an orthogonal mental state. This framework can contribute to elucidating how the human brain responds to and counteracts the potential influence of generative AI.

The success of large-scale language models like GPT can be attributed to their ability to efficiently predict the next token in a sequence. However, these models rely on constant computational effort regardless of the complexity of the token they are predicting, lacking the capacity for iterative refinement. In this paper, we introduce a novel Loop-Residual Neural Network, which achieves better performance by utilizing longer computational time without increasing the model size. Our approach revisits the input multiple times, refining the prediction by iteratively looping over a subset of the model with residual connections. We demonstrate the effectiveness of this method through experiments comparing versions of GPT-2 with our Loop-Residual models, showing improved performance in language modeling tasks while maintaining similar parameter counts. Importantly, these improvements are achieved without the need for extra training data.

The security of Large Language Model (LLM) applications is fundamentally challenged by "form-first" attacks like prompt injection and jailbreaking, where malicious instructions are embedded within user inputs. Conventional defenses, which rely on post hoc output filtering, are often brittle and fail to address the root cause: the model's inability to distinguish trusted instructions from untrusted data. This paper proposes Countermind, a multi-layered security architecture intended to shift defenses from a reactive, post hoc posture to a proactive, pre-inference, and intra-inference enforcement model. The architecture proposes a fortified perimeter designed to structurally validate and transform all inputs, and an internal governance mechanism intended to constrain the model's semantic processing pathways before an output is generated. The primary contributions of this work are conceptual designs for: (1) A Semantic Boundary Logic (SBL) with a mandatory, time-coupled Text Crypter intended to reduce the plaintext prompt injection attack surface, provided all ingestion paths are enforced. (2) A Parameter-Space Restriction (PSR) mechanism, leveraging principles from representation engineering, to dynamically control the LLM's access to internal semantic clusters, with the goal of mitigating semantic drift and dangerous emergent behaviors. (3) A Secure, Self-Regulating Core that uses an OODA loop and a learning security module to adapt its defenses based on an immutable audit log. (4) A Multimodal Input Sandbox and Context-Defense mechanisms to address threats from non-textual data and long-term semantic poisoning. This paper outlines an evaluation plan designed to quantify the proposed architecture's effectiveness in reducing the Attack Success Rate (ASR) for form-first attacks and to measure its potential latency overhead.

As embodied intelligence emerges as a core frontier in artificial intelligence research, simulation platforms must evolve beyond low-level physical interactions to capture complex, human-centered social behaviors. We introduce FreeAskWorld, an interactive simulation framework that integrates large language models (LLMs) for high-level behavior planning and semantically grounded interaction, informed by theories of intention and social cognition. Our framework supports scalable, realistic human-agent simulations and includes a modular data generation pipeline tailored for diverse embodied tasks.To validate the framework, we extend the classic Vision-and-Language Navigation (VLN) task into a interaction enriched Direction Inquiry setting, wherein agents can actively seek and interpret navigational guidance. We present and publicly release FreeAskWorld, a large-scale benchmark dataset comprising reconstructed environments, six diverse task types, 16 core object categories, 63,429 annotated sample frames, and more than 17 hours of interaction data to support training and evaluation of embodied AI systems. We benchmark VLN models, and human participants under both open-loop and closed-loop settings. Experimental results demonstrate that models fine-tuned on FreeAskWorld outperform their original counterparts, achieving enhanced semantic understanding and interaction competency. These findings underscore the efficacy of socially grounded simulation frameworks in advancing embodied AI systems toward sophisticated high-level planning and more naturalistic human-agent interaction. Importantly, our work underscores that interaction itself serves as an additional information modality.

Long-horizon agent runs generate experience that can improve both the current run and future work. Most self-improvement methods process this experience only after execution ends, so they cannot redirect the active run or immediately apply and validate lessons learned from it. We argue that self-improvement should instead be live, using emerging experience both to redirect the active run and to update the persistent harness. Existing agent architectures do not fully support this goal. Single-agent self-correction combines task execution and trajectory assessment within one context, while subagent delegation separates execution but typically cannot redirect an active subagent. We present PILOT, a supervisor-worker harness for live self-improvement through two coupled mechanisms: (1) live steering lets a separate supervisor redirect or abort the active worker during execution; and (2) live self-evolution distils procedures and failure modes revealed during execution into reusable skills and memory. Across two frozen backbones and three benchmarks, PILOT ranks first in five of six configurations. On Terminal-Bench 2.0, PILOT outperforms counterpart harnesses by up to 9.8 percentage points. In the self-improvement setting, PILOT gains 14.6 points with GLM-5.1 and 12.4 points with Kimi-K2.6. Mean output tokens fall by 42.9% and 47.4%, while successful evaluations per million output tokens rise by 110.3% and 134.0%, respectively.

Class-agnostic counting methods enumerate objects of an arbitrary class, providing tremendous utility in many fields. Prior works have limited usefulness as they require either a set of examples of the type to be counted or that the query image contains only a single type of object. A significant factor in these shortcomings is the lack of a dataset to properly address counting in settings with more than one kind of object present. To address these issues, we propose the first Multi-class, Class-Agnostic Counting dataset (MCAC) and A Blind Counter (ABC123), a method that can count multiple types of objects simultaneously without using examples of type during training or inference. ABC123 introduces a new paradigm where instead of requiring exemplars to guide the enumeration, examples are found after the counting stage to help a user understand the generated outputs. We show that ABC123 outperforms contemporary methods on MCAC without needing human in-the-loop annotations. We also show that this performance transfers to FSC-147, the standard class-agnostic counting dataset. MCAC is available at MCAC.active.vision and ABC123 is available at ABC123.active.vision.

The advances in vision-language models (VLMs) have led to a growing interest in autonomous driving to leverage their strong reasoning capabilities. However, extending these capabilities from 2D to full 3D understanding is crucial for real-world applications. To address this challenge, we propose OmniDrive, a holistic vision-language dataset that aligns agent models with 3D driving tasks through counterfactual reasoning. This approach enhances decision-making by evaluating potential scenarios and their outcomes, similar to human drivers considering alternative actions. Our counterfactual-based synthetic data annotation process generates large-scale, high-quality datasets, providing denser supervision signals that bridge planning trajectories and language-based reasoning. Futher, we explore two advanced OmniDrive-Agent frameworks, namely Omni-L and Omni-Q, to assess the importance of vision-language alignment versus 3D perception, revealing critical insights into designing effective LLM-agents. Significant improvements on the DriveLM Q\&A benchmark and nuScenes open-loop planning demonstrate the effectiveness of our dataset and methods.

Large language model (LLM)-powered agents can translate high-level user intents into plans and actions in an environment. Yet after observing an outcome, users may wonder: What if I had phrased my intent differently? We introduce a framework that enables such counterfactual reasoning in agentic LLM-driven control scenarios, while providing formal reliability guarantees. Our approach models the closed-loop interaction between a user, an LLM-based agent, and an environment as a structural causal model (SCM), and leverages test-time scaling to generate multiple candidate counterfactual outcomes via probabilistic abduction. Through an offline calibration phase, the proposed conformal counterfactual generation (CCG) yields sets of counterfactual outcomes that are guaranteed to contain the true counterfactual outcome with high probability. We showcase the performance of CCG on a wireless network control use case, demonstrating significant advantages compared to naive re-execution baselines.

RTL implementations frequently lack up-to-date or consistent specifications, making comprehension, maintenance, and verification costly and error-prone. While prior work has explored generating specifications from RTL using large language models (LLMs), ensuring that the generated documents faithfully capture design intent remains a major challenge. We present SpecLoop, an agentic framework for RTL-to-specification generation with a formal-verification-driven iterative feedback loop. SpecLoop first generates candidate specifications and then reconstructs RTL from these specifications; it uses formal equivalence checking tools between the reconstructed RTL and the original design to validate functional consistency. When mismatches are detected, counterexamples are fed back to iteratively refine the specifications until equivalence is proven or no further progress can be made. Experiments across multiple LLMs and RTL benchmarks show that incorporating formal verification feedback substantially improves specification correctness and robustness over LLM-only baselines, demonstrating the effectiveness of verification-guided specification generation.

Scaling model performance typically requires increasing model size. Looped Transformer offers a compelling alternative by iteratively reusing the same Transformer blocks, trading additional computation for improved performance without increasing parameter count or context length. Because the number of loop iterations can be adjusted at inference, it also provides a natural mechanism for balancing performance and test-time compute. However, Looped Transformer still suffers from training instability when the number of loop iterations increases. Our analysis reveals that this instability stems from two sources: gradient oscillation and residual explosion. To address these two problems, we propose the Fully Looped Transformer, which introduces two parameter-free modifications: (1) Fully Looped Architecture, which distributes inter-loop signals across all layers to mitigate residual explosion; (2) Attention Injection, which reuses the existing attention block to suppress gradient oscillation. These modifications stabilize training dynamics, enabling the Fully Looped Transformer to be trained stably up to 12 loop iterations, whereas other baseline looped models collapse in this regime. In milder settings where Looped Transformer does not collapse, Fully Looped Transformer still improves average downstream-task performance by up to 13.2\%. Overall, our experiments demonstrate that Fully Looped Transformer improves training stability, enhances downstream performance, and provides preliminary adaptability under different test-time compute budgets by varying loop iterations at inference.

Mixture-of-Experts (MoE) architectures efficiently scale Large Language Models (LLMs) by activating only a small fraction of their experts per token, yet the full parameter count - dominated by the expert parameters - must be held in training and inference memory. To address this, we introduce Expert Tying, an architectural modification that shares expert parameters across consecutive transformer layers while preserving independent, layer-wise routing and attention. We evaluate this approach across common, state-of-the-art architectures, including OLMoE, Qwen3, and DeepSeek-style MoEs. Our pretraining experiments demonstrate that tying experts can reduce memory footprint by almost 2x at virtually no degradation in perplexity or downstream quality. By exploiting the parameter redundancy inherent in MoE pathways, our method provides a highly favorable compute-to-memory trade-off, advancing efficient training and scaling of next-generation LLMs.

Recent studies have shown the impressive efficacy of counterfactually augmented data (CAD) for reducing NLU models' reliance on spurious features and improving their generalizability. However, current methods still heavily rely on human efforts or task-specific designs to generate counterfactuals, thereby impeding CAD's applicability to a broad range of NLU tasks. In this paper, we present AutoCAD, a fully automatic and task-agnostic CAD generation framework. AutoCAD first leverages a classifier to unsupervisedly identify rationales as spans to be intervened, which disentangles spurious and causal features. Then, AutoCAD performs controllable generation enhanced by unlikelihood training to produce diverse counterfactuals. Extensive evaluations on multiple out-of-domain and challenge benchmarks demonstrate that AutoCAD consistently and significantly boosts the out-of-distribution performance of powerful pre-trained models across different NLU tasks, which is comparable or even better than previous state-of-the-art human-in-the-loop or task-specific CAD methods. The code is publicly available at https://github.com/thu-coai/AutoCAD.

Under pure textual modality, Large Language Models (LLMs) have demonstrated remarkable success in complex reasoning tasks by decomposing them into simpler sub-problems. However, Multimodal Large Language Models (MLLMs) still struggle with some seemingly straightforward visual tasks, such as counting and solving jigsaw puzzles. We argue that these tasks challenge the ability of visual-to-textual conversion, where MLLMs convert visual information perceived from the input scene, to textual information for further reasoning and generating the answer. If the complexity of the visual input is beyond the perceptual capability of the MLLMs, without decomposing this conversion process, simply scaling inference-time reasoning cannot solve the task because it repeatedly encounters the same perceptual bottleneck. We propose an approach, autonomous imagination, to enable MLLMs to iteratively modify visual inputs (e.g. isolating objects, rearranging puzzle pieces) into intermediate visual states, decomposing visual-to-textual conversion into closed-loop visual modification steps. We show that, without any retraining, MLLMs can now solve tasks initially beyond their perceptual capability, highlighting that closed-loop visual modification can be an effective way of decomposing the visual reasoning task into solvable substeps. Our code and data are released at https://future-item.github.io/autoimagine-site/.

Long-term persona agents must remain identifiable while adapting to new events, relationships, evidence, and social conditions. We identify self-locking as a runtime failure mode in continuing persona-life loops: locally plausible events keep appearing while the generated life collapses toward familiar environments, weak relationships, suspended decisions, and stale life stages. We trace this failure to model-level convergence toward high-probability behavioral channels and system-level context gravity from State, memory, history, and environment summaries. We introduce AutoPersonas, a multi-timescale life-environment engine for bounded persona-level recursive self-evolution. It separates environment-side Occurrences, accumulated Observations, and persona State. Its OSO loop admits divergent future-facing material while requiring evidence-governed absorption before State or reachability changes. A three-year compressed simulation exposed environment watermark shells, occurrence-hardening gaps, slow-change accumulation failures, recursive indecision, and weak relationship persistence. An eight-model 40-day stress test generated 1,600 events and found mean rolling 5-day action-category repetition of 95.2%-97.6%, with all models crossing 90% by day 11. Semantic re-keeping found 79.0%-88.0% macro-theme repetition across all direct-loop runs. In a same-runtime 40-day A/B, context-slice masking plus per-sample divergence targeting reduced macro-theme repetition from 61.8% to 36.3% and roughly doubled cumulative theme count. A juvenile-goblin fictional-world run reproduced the anti-fixation regime without hard real-world intrusions. These results support a bounded claim: separating controlled divergence from evidence-governed absorption can reduce persona-environment self-locking while preserving identity continuity.

Hyperspectral imaging (HSI) is useful for material discrimination, but operational mine screening also depends on how many false alarms must be inspected before targets are found. This paper studies PFM-1 landmine detection in unmanned aerial vehicle (UAV) visible and near-infrared (VNIR) HSI using spectral angle mapper (SAM), matched filter (MF), adaptive coherence estimator (ACE), and constrained energy minimization (CEM). We compare a ground-measured SVC signature, a fully informed in-scene core-pixel signature, and a simulated human-in-the-loop signature bootstrap. Besides receiver operating characteristic area under the curve and average precision, we report target-discovery curves and spatial candidate-review counts. Full-review bootstrapping reaches the fully informed in-scene signature case after all seven target regions are verified, but the required inspection effort varies strongly: ACE confirms all regions in two rounds and nine candidate inspections, whereas the SAM variants need thousands of candidate reviews for their final target locations. Code is available at https://github.com/SagarLekhak/IEEE_WHISPERS_2026_UAV_HSI_PFM1.

Scientific progress emerges from a longitudinal ecosystem in which researchers, institutions, funding agencies, collaboration networks, and the scientific literature co-evolve. As AI becomes increasingly involved throughout the scientific research cycle, understanding these interconnected and evolving processes becomes increasingly important. We introduce SciUtopia, a persistent, closed-loop LLM-agent simulation framework for studying academic research ecosystems. SciUtopia models interconnected scientific processes such as research-direction choice, collaboration, submission, peer review, resubmission, citation, funding, and researcher attrition, while maintaining evolving states across simulated years. Its configurable institutional mechanisms and information channels provide a controlled testbed for matched counterfactual experiments and targeted interventions. Across 61 simulation worlds, SciUtopia simulates over 40,000 researchers from 8,000 institutions, producing around 400,000 publication decisions and 1.2 million LLM-generated peer reviews. Using these longitudinal simulations, we find that rejection-driven resubmission substantially amplifies reviewer burden beyond population growth alone, cautious exploration balances citation impact with career success and long-term topic diversity, and resource inequality can emerge even without detectable cumulative advantage from narrowly winning early funding. Code is available at https://github.com/Ahren09/ScienceUtopia.

Developing autonomous agents that can interact with changing environments is an open challenge in machine learning. Robustness is particularly important in these settings as agents are often fit offline on expert demonstrations but deployed online where they must generalize to the closed feedback loop within the environment. In this work, we explore the application of recurrent neural networks to tasks of this nature and understand how a parameterization of their recurrent connectivity influences robustness in closed-loop settings. Specifically, we represent the recurrent connectivity as a function of rank and sparsity and show both theoretically and empirically that modulating these two variables has desirable effects on network dynamics. The proposed low-rank, sparse connectivity induces an interpretable prior on the network that proves to be most amenable for a class of models known as closed-form continuous-time neural networks (CfCs). We find that CfCs with fewer parameters can outperform their full-rank, fully-connected counterparts in the online setting under distribution shift. This yields memory-efficient and robust agents while opening a new perspective on how we can modulate network dynamics through connectivity.

Automated detection of vulnerabilities in source code is an essential cybersecurity challenge, underpinning trust in digital systems and services. Graph Neural Networks (GNNs) have emerged as a promising approach as they can learn structural and logical code relationships in a data-driven manner. However, their performance is severely constrained by training data imbalances and label noise. GNNs often learn 'spurious' correlations from superficial code similarities, producing detectors that fail to generalize well to unseen real-world data. In this work, we propose a unified framework for robust and interpretable vulnerability detection, called VISION, to mitigate spurious correlations by systematically augmenting a counterfactual training dataset. Counterfactuals are samples with minimal semantic modifications but opposite labels. Our framework includes: (i) generating counterfactuals by prompting a Large Language Model (LLM); (ii) targeted GNN training on paired code examples with opposite labels; and (iii) graph-based interpretability to identify the crucial code statements relevant for vulnerability predictions while ignoring spurious ones. We find that VISION reduces spurious learning and enables more robust, generalizable detection, improving overall accuracy (from 51.8% to 97.8%), pairwise contrast accuracy (from 4.5% to 95.8%), and worst-group accuracy (from 0.7% to 85.5%) on the Common Weakness Enumeration (CWE)-20 vulnerability. We further demonstrate gains using proposed metrics: intra-class attribution variance, inter-class attribution distance, and node score dependency. We also release CWE-20-CFA, a benchmark of 27,556 functions (real and counterfactual) from the high-impact CWE-20 category. Finally, VISION advances transparent and trustworthy AI-based cybersecurity systems through interactive visualization for human-in-the-loop analysis.

Spatial intelligence unfolds through a perception-action loop: agents act to acquire observations, and reason about how observations vary as a function of action. Rather than passively processing what is seen, they actively uncover what is unseen - occluded structure, dynamics, containment, and functionality that cannot be resolved from passive sensing alone. We move beyond prior formulations of spatial intelligence that assume oracle observations by recasting the observer as an actor. We introduce ESI-BENCH, a comprehensive benchmark for embodied spatial intelligence spanning 10 task categories and 29 subcategories built on OmniGibson, grounded in Spelke's core knowledge systems. Agents must decide what abilities to deploy - perception, locomotion, and manipulation - and how to sequence them to actively accumulate task-relevant evidence. We conduct extensive experiments on state-of-the-art MLLMs and find that active exploration substantially outperforms passive counterparts, with agents spontaneously discovering emergent spatial strategies without explicit instructions, while random multi-view often adds noise rather than signal despite consuming far more images. Most failures stem not from weak perception but from action blindness: poor action choices lead to poor observations, which in turn drive cascading errors. While explicit 3D grounding stabilizes reasoning on depth-sensitive tasks, imperfect 3D representation proves more harmful than 2D baselines by distorting spatial relations. Human studies further reveal that unlike humans who seek falsifying viewpoints and revise beliefs under contradiction, models commit prematurely with high confidence regardless of evidence quality, exposing a metacognitive gap that neither better perception nor more embodied interaction alone can close.

The rapid advancement of Large Language Models (LLMs) has driven their deployment toward general-purpose harness environments, where LLM-based agents operate in sandbox workspaces and interact directly with file systems and shells. While numerous post-training pipelines exist for tool-use agents, their counterparts for harness-based agents remain scarce and are predominantly one-shot and teacher-dependent: a stronger external model synthesizes tasks and collects trajectories, the target agent is trained once, and evaluation results are consumed by human researchers rather than fed back into the loop. Such pipelines are inherently bounded by the capability of the external model and the scope of human prior, leaving no room for self-improvement. To address these limitations, we propose ClawLoop, a framework that enables self-improving without any external teacher model and with minimal prior dependencies. ClawLoop composes three phases into a self-sustaining cycle: Task Synthesis, which generates a diverse pool of training tasks via two complementary construction routines, applies diagnosis-conditioned difficulty growth followed by both agent-free and agent-based task validation; Training, which updates the agent via SFT and/or RL; and Diagnosis and Feedback, which analyzes the agent's rollout behaviors to produce a capability analysis report that will be used as feedback for task synthesis in the next iteration. Using Qwen3.6-27B as the loop model, ClawLoop yields consistent improvements on SkillsBench, Claw-Eval-Live, and ClawGym-Bench. The iteratively refined tasks are further transferred to smaller-scale Qwen3.5-4B and 9B models with gains across all benchmarks, validating data quality independently of the loop model.

The peculiar velocities of biased tracers of the cosmic density field contain important information about the growth of large scale structure and generate anisotropy in the observed clustering of galaxies. Using N-body data, we show that velocity expansions for halo redshift-space power spectra are converged at the percent-level at perturbative scales for most line-of-sight angles mu when the first three pairwise velocity moments are included, and that the third moment is well-approximated by a counterterm-like contribution. We compute these pairwise-velocity statistics in Fourier space using both Eulerian and Lagrangian one-loop perturbation theory using a cubic bias scheme and a complete set of counterterms and stochastic contributions. We compare the models and show that our models fit both real-space velocity statistics and redshift-space power spectra for both halos and a mock sample of galaxies at sub-percent level on perturbative scales using consistent sets of parameters, making them appealing choices for the upcoming era of spectroscopic, peculiar-velocity and kSZ surveys.

Large Language Models (LLMs) have achieved significant success in complex reasoning but remain bottlenecked by reliance on expert-annotated data and external verifiers. While existing self-evolution paradigms aim to bypass these constraints, they often fail to identify the optimal learning zone and risk reinforcing collective hallucinations and incorrect priors through flawed internal feedback. To address these challenges, we propose Autonomous Evolutionary Reasoning Optimization (AERO), an unsupervised framework that achieves autonomous reasoning evolution by internalizing self-questioning, answering, and criticism within a synergistic dual-loop system. Inspired by the Zone of Proximal Development (ZPD) theory, AERO utilizes entropy-based positioning to target the ``solvability gap'' and employs Independent Counterfactual Correction for robust verification. Furthermore, we introduce a Staggered Training Strategy to synchronize capability growth across functional roles and prevent curriculum collapse. Extensive evaluations across nine benchmarks spanning three domains demonstrate that AERO achieves average performance improvements of 4.57\% on Qwen3-4B-Base and 5.10\% on Qwen3-8B-Base, outperforming competitive baselines. Code is available at https://github.com/mira-ai-lab/AERO.

Recent vision-language navigation (VLN) systems increasingly adapt pretrained vision-language models (VLMs) into vision-language-action (VLA) policies that map egocentric observations and language instructions directly to navigation actions. Although semantically capable, such action-centric training does not explicitly model how the agent's visual observations should evolve under its predicted motion. Generative world-action models (WAMs) jointly predict future observations and actions, yet existing WAMs for continuous VLN do not condition joint future-view and action generation on geometry-aware representations inferred from the observed history. We present WNM-3D, a generative World Navigation Model with 3D scene conditioning for continuous VLN. To consolidate past observations into persistent scene context, a frozen feed-forward geometry encoder extracts geometry-aware representations from the monocular egocentric RGB history, and a trainable 3D Scene-to-Token Adapter converts them into a fixed-length prefix in the token space of the world-action Diffusion Transformer. Through block-causal attention, this prefix conditions every future video-action block, providing a shared geometric context for both future-view and action generation. We train WNM-3D through supervised world-action fine-tuning on A*-generated demonstrations, DAgger-style adaptation on policy-visited states, and DanceGRPO-based closed-loop policy optimization. Experiments on GN-Bench show that WNM-3D outperforms strong VLM-based navigation policies and its 2D-conditioned counterpart in closed-loop navigation. On a fixed near-goal evaluation set, WNM-3D also achieves higher flow-action consistency and lower visual-motion error.

Scalable driving simulators typically execute vehicle commands using prescribed behavioral or kinematic rules, overlooking the physics of tire-road interfaces, thereby limiting their ability to capture how adverse road and environmental conditions alter vehicle execution and propagate through traffic. To address this limitation, we present SceneFactory-3D, a GPU-batched, physics-grounded multi-agent driving simulator. Vehicles execute acceleration and steering commands via suspension- and friction-limited forces evaluated at each wheel-contact point. Spatially varying friction, per-world 3D heightfields, gravity, and rigid contact consistently govern wheel motion and chassis collisions. Per-world terrain isolation and GPU batching enable SceneFactory-3D to run matched physical counterfactuals in parallel: traffic scenario setup and vehicle controllers remain fixed while only the road condition changes, enabling the resulting closed-loop effects to be evaluated across parallel worlds. To demonstrate the advantage of the SceneFactory-3D-enabled counterfactual evaluation, we conduct an empirical study on vehicle controllers' sensitivity to road conditions. We study three learned-policy families on 1,024 matched 12-vehicle worlds per condition, and two classical planners on a shared 32-world subset, across 21 friction and grade conditions. When friction drops from 1.0 to 0.18, the share of vehicles that clear the work zone safely falls by 6 to 90 percentage points across learned policies (18-19 for classical planners), and near-collision situations become more frequent for every learned policy. Code: https://github.com/SmallWorldLab/SceneFactory_3D

Autonomous improvement loops are hard to trust because the improvement process is usually external scaffolding bolted onto the agent: failures go unlogged, diagnoses cannot be replayed, and promote-or-discard decisions land in a side database rather than the agent's own history. We show that an event-sourced agent runtime removes that friction and turns controlled improvement into a first-class workflow. When the agent's state is a deterministic projection of an append-only event log, failures are recorded, a run replays exactly from its log, candidate patches scope to typed pipeline seams, gates are auditable, and every promotion or discard is itself an event. We demonstrate this with Regimes, a loop on the ActiveGraph runtime that diagnoses failed evaluations, proposes a repair at a pipeline point, and promotes it only after static checks, sandbox execution, in-sample evaluation, and held-out validation. The loop is target-agnostic: the same control flow runs against different tasks through a common interface. On LongMemEval-S the dominant failure is not retrieval but reconciliation: the evidence is already in the assembled context, yet the reader answers incorrectly. Across five seeded held-out splits, Regimes discovers reader-prompt repairs that improve final held-out accuracy by +0.05 to +0.10 in four splits and +0.01 in one over-promotion split; two splits are individually significant (seed 5 unadjusted for its sequential promotion structure), and the pooled count is descriptive only, since the splits share one 500-question pool. The durable contributions are ActiveGraph as an auditable substrate that makes controlled improvement loops tractable, the held-out-gated loop it supports, the failure-regime taxonomy routing each failure to a pipeline location (whose marginal value over an unrouted baseline is the primary open question), and the prompt-as-discovery-probe hypothesis.

The vast majority of the world's languages, particularly creoles like Nagamese, remain severely under-resourced in Natural Language Processing (NLP), creating a significant barrier to their representation in digital technology. This paper introduces NagaNLP, a comprehensive open-source toolkit for Nagamese, bootstrapped through a novel methodology that relies on LLM-driven but human-validated synthetic data generation. We detail a multi-stage pipeline where an expert-guided LLM (Gemini) generates a candidate corpus, which is then refined and annotated by native speakers. This synthetic-hybrid approach yielded a 10K pair conversational dataset and a high-quality annotated corpus for foundational tasks. To assess the effectiveness of our methodology, we trained both discriminative and generative models. Our fine-tuned XLM-RoBERTa-base model establishes a new benchmark for Nagamese, achieving a 93.81\% accuracy (0.90 F1-Macro) on Part-of-Speech tagging and a 0.75 F1-Macro on Named Entity Recognition, massively outperforming strong zero-shot baselines. Furthermore, we fine-tuned a Llama-3.2-3B Instruct model, named NagaLLaMA, which demonstrates superior performance on conversational tasks, achieving a Perplexity of 3.85, an order of magnitude improvement over its few-shot counterpart (96.76). We release the NagaNLP toolkit, including all datasets, models, and code, providing a foundational resource for a previously underserved language and a reproducible framework for reducing data scarcity in other low-resource contexts.

This paper presents a JAX-Python implementation of the galaxy power spectrum up to one-loop order in the effective field theory of large-scale structure, based on both the Eulerian and Lagrangian perturbation theories. The code uses JAX to enable automatic differentiation with respect to parameters such as cosmology, galaxy bias, or counterterm coefficients. This facilitates applications such as parameter inference using the gradient of the posterior, e.g., Hamiltonian Monte Carlo sampling. The code can compute both the EPT and LPT power spectra in a few milliseconds on a GPU, after just-in-time compilation. We also identify the various sources of numerical errors associated with discretization, and design the numerical implementation to minimize them, achieving relative errors of order 0.01% at scales k lesssim 1, h, Mpc^{-1}, compared with brute-force numerical integration. Notably, this is the first auto-differentiable implementation of the one-loop galaxy power spectrum based on LPT. The natural resummation of the long-wavelength displacements in LPT further makes the code well suited for applications involving features in the power spectrum beyond the standard BAO feature, including primordial features. Our code, elf, is publicly available.

Control systems are ubiquitous in modern technology, comprising an engineered plant to be kept within specific, often fine-tuned, limits, and a separate controller that ensures this is the case. While modern controllers often employ digital computers, other examples are purely mechanical, or even biological. It is an open question whether computation is happening within all controllers by virtue of them being part of a control system. Abstraction/ Representation theory (ART) has been developed to tackle just this question of whether a physical system is computing. Here, we demonstrate how to use ART to model control systems, and analyse them for computational properties. We determine that the plant of a control system is (a proxy for) the representational entity necessary in ART for the existence of any computation: the plant is the user of the controller. We consider specific systems: a digital thermostat, an electro-mechanical thermostat, the purely mechanical centrifugal governor, and an open-loop human-controlled heating system. We show that all these systems, and control systems in general, are performing some degree of computation. As an initial use of these results, we apply them to computationalism within cognitive theory: we show the governor is computing, so it cannot play its role of counter-example in the question of whether the brain is too.

VLM-driven self-improvement of web code has a structural flaw: the model that proposes the repair is the model that judges it, and visual plausibility under that judge is a poor proxy for whether the page actually works. What the loop is missing is a counterparty the VLM cannot fool, and the browser already is that counterparty: a deterministic, executable simulator of how an HTML artifact behaves under user actions, and in everything but name a world model for web code. We present WebWorld, the interface that lets a VLM prior interact with this browser-as-world-model autonomously and decides which interactions become supervision. Each round, the VLM emits a critique that the planner compiles into a typed interaction contract; the browser re-executes the candidate and issues an acceptance certificate only when both target progress and preservation of every previously verified capability hold; certified transitions accumulate as a quality ratchet that is the only thing the SFT export ever sees. Under matched training, WebWorld-27B improves Raw-27B by 5.3 points on HTMLBench-400 and 14.9 points on MiniAppBench-Val, and reaches the level of strong frontier systems such as Kimi-K2.6 and GPT-5.4 on interactive HTML generation. Equal-size ablations show that browser-backed admission carries the gain: without the certificate, the matched 9B lift nearly disappears.

We propose a mass-dependent MOM scheme to renormalize UV divergence of unpolarized PDFs at one-loop order. This approach which is based on a once subtracted dispersion relation does not need any regulator. The overall counterterms are obtained from the imaginary part of large transverse momentum region in loop integrals. The mass-dependent characteristic of the scheme yields to mass-dependent splitting functions for the DGLAP evolution equations. While the flavor number is fixed at any renormalization scale, the decoupling theorem is automatically imposed by the mass-dependent splitting functions. The required symmetries are also automatically respected by our prescription.

Social simulation offers the social sciences an experimental instrument that the real world cannot supply, and generative agents have transformed it by acting as silicon samples that unite agent-based modeling with real behavioral data. Existing platforms verify collective behavior, align simulated populations with real societies in cross-sections, and employ autonomous agents for the research process. However, two social science requirements remain without systematic support: intervention in the content of a simulation and the researcher's control over the process that produces it. We present SocioVerse2, which extends SocioVerse 1.0 into a human-AI co-evolutionary paradigm built from two loops and one infrastructure. The longitudinal simulation loop simulates the target population with evolving environments and forks counterfactual branches via interventions. The controllable research loop takes the study itself as an editable state and updates state versions via controllable editing. The social science agentic infrastructure carries both loops through composable skills with researcher checkpoints, a population service over five persona pools, and an environment service over 21 real-world signal sources with point-in-time guarantees. We validate SocioVerse2 across three case families and seven case studies, from reproducing canonical agent-based models to modeling policy processes on real records and nowcasting macro-economic indices beyond the response model's knowledge cutoff. With the human-AI co-evolutionary paradigm, these cases go beyond system demonstrations to become substantive studies that investigate frontier questions in their respective disciplines. Code, data services, and a workbench are released as open-source resources.

High-quality 4D head avatars from one or a few source portraits are central to telepresence, AR/VR, and digital-human interaction. 3D Gaussian Splatting (3DGS) has emerged as the dominant representation, with two complementary regimes (generalizable feed-forward predictors and per-subject refiners) maturing in parallel. However, existing feed-forward predictors are trained on a single dataset family with a hard-coded source count, inheriting the corresponding domain bias. Per-subject refiners require 300K--600K iterations and rely on adaptive densification that destroys upstream Gaussian layouts, preventing the two regimes from sharing a representation end-to-end. To bridge both regimes we propose SpatialAvatar-0 on a shared FLAME-mesh-bound Gaussian representation: a feed-forward generator with a parameter-free K-source mean-pool and a monocular-temporal to multi-view-spatial two-phase schedule that anchors against identity-prior collapse onto the smaller multi-view set. We further introduce a 10K-iter layout-preserving per-subject refinement loop that freezes the FLAME-binding and Gaussian count and replaces densification with a three-component anti-spike regularization. On VFHQ/HDTF cross-domain zero-shot we surpass the in-domain leader GAGAvatar by +1.5 dB PSNR despite never training on either test domain, and on the SplattingAvatar monocular benchmark we lead every reported metric, surpassing the 300K-iter GeoAvatar by +1.3 dB PSNR at up to 60x shorter per-subject schedule than common SOTA baselines. Website: https://spatialwalk.github.io/SpatialAvatar-0.

We tackle the problem of quantifying the number of objects by a generative text-to-image model. Rather than retraining such a model for each new image domain of interest, which leads to high computational costs and limited scalability, we are the first to consider this problem from a domain-agnostic perspective. We propose QUOTA, an optimization framework for text-to-image models that enables effective object quantification across unseen domains without retraining. It leverages a dual-loop meta-learning strategy to optimize a domain-invariant prompt. Further, by integrating prompt learning with learnable counting and domain tokens, our method captures stylistic variations and maintains accuracy, even for object classes not encountered during training. For evaluation, we adopt a new benchmark specifically designed for object quantification in domain generalization, enabling rigorous assessment of object quantification accuracy and adaptability across unseen domains in text-to-image generation. Extensive experiments demonstrate that QUOTA outperforms conventional models in both object quantification accuracy and semantic consistency, setting a new benchmark for efficient and scalable text-to-image generation for any domain.

We propose a method for adapting neural networks to distribution shifts at test-time. In contrast to training-time robustness mechanisms that attempt to anticipate and counter the shift, we create a closed-loop system and make use of a test-time feedback signal to adapt a network on the fly. We show that this loop can be effectively implemented using a learning-based function, which realizes an amortized optimizer for the network. This leads to an adaptation method, named Rapid Network Adaptation (RNA), that is notably more flexible and orders of magnitude faster than the baselines. Through a broad set of experiments using various adaptation signals and target tasks, we study the efficiency and flexibility of this method. We perform the evaluations using various datasets (Taskonomy, Replica, ScanNet, Hypersim, COCO, ImageNet), tasks (depth, optical flow, semantic segmentation, classification), and distribution shifts (Cross-datasets, 2D and 3D Common Corruptions) with promising results. We end with a discussion on general formulations for handling distribution shifts and our observations from comparing with similar approaches from other domains.

Mainstream large vision-language models (LVLMs) inherently encode cultural biases, highlighting the need for diverse multimodal datasets. To address this gap, we introduce Pearl, a large-scale Arabic multimodal dataset and benchmark explicitly designed for cultural understanding. Constructed through advanced agentic workflows and extensive human-in-the-loop annotations by 45 annotators from across the Arab world, Pearl comprises over K multimodal examples spanning ten culturally significant domains covering all Arab countries. We further provide two robust evaluation benchmarks Pearl and Pearl-Lite along with a specialized subset Pearl-X explicitly developed to assess nuanced cultural variations. Comprehensive evaluations on state-of-the-art open and proprietary LVLMs demonstrate that reasoning-centric instruction alignment substantially improves models' cultural grounding compared to conventional scaling methods. Pearl establishes a foundational resource for advancing culturally-informed multimodal modeling research. All datasets and benchmarks are publicly available.

Multi-agent systems (MAS) are critical for automating complex tasks, yet their practical deployment is severely hampered by the challenge of failure attribution. Current diagnostic tools, which rely on statistical correlations, are fundamentally inadequate; on challenging benchmarks like Who\&When, state-of-the-art methods achieve less than 15\% accuracy in locating the root-cause step of a failure. To address this critical gap, we introduce the first failure attribution framework for MAS grounded in multi-granularity causal inference. Our approach makes two key technical contributions: (1) a performance causal inversion principle, which correctly models performance dependencies by reversing the data flow in execution logs, combined with Shapley values to accurately assign agent-level blame; (2) a novel causal discovery algorithm, CDC-MAS, that robustly identifies critical failure steps by tackling the non-stationary nature of MAS interaction data. The framework's attribution results directly fuel an automated optimization loop, generating targeted suggestions whose efficacy is validated via counterfactual simulations. Evaluations on the Who\&When and TRAIL benchmarks demonstrate a significant leap in performance. Our method achieves up to 36.2\% step-level accuracy. Crucially, the generated optimizations boost overall task success rates by an average of 22.4\%. This work provides a principled and effective solution for debugging complex agent interactions, paving the way for more reliable and interpretable multi-agent systems.

World models, which simulate an environment and predict how it changes under actions, are increasingly used in real-world applications such as robotics. Complex systems call for the same tool because the effect of an action is not immediate. Seeding nodes for a campaign, or immunizing nodes against an epidemic, changes little on its own; what matters is the outcome that unfolds over the steps that follow. Designing an algorithm that selects such actions to maximize expected performance on a task is inherently iterative, and every candidate must be scored by the outcome it produces. Obtaining that outcome has relied on simulation, whose cost becomes a bottleneck when candidates are evaluated over many sampled trajectories. We propose an action-conditioned Network World Model that learns a network's diffusion dynamics under interventions over time, applies each action to the network, and predicts the outcome that follows. It serves as a fast evaluator inside an algorithm design loop in which a coding agent designs and refines executable algorithms using feedback from full rollouts, action-level credit, and counterfactual probes over alternative interventions. Across eight network tasks and five diffusion models, the designed algorithms match or exceed the strongest reported baseline in 138 of 141 settings while enabling up to 14.5 times faster rollouts than Monte Carlo simulation. Code will be released upon acceptance.

The ability to perceive how objects change over time is a crucial ingredient in human intelligence. However, current benchmarks cannot faithfully reflect the temporal understanding abilities of video-language models (VidLMs) due to the existence of static visual shortcuts. To remedy this issue, we present VITATECS, a diagnostic VIdeo-Text dAtaset for the evaluation of TEmporal Concept underStanding. Specifically, we first introduce a fine-grained taxonomy of temporal concepts in natural language in order to diagnose the capability of VidLMs to comprehend different temporal aspects. Furthermore, to disentangle the correlation between static and temporal information, we generate counterfactual video descriptions that differ from the original one only in the specified temporal aspect. We employ a semi-automatic data collection framework using large language models and human-in-the-loop annotation to obtain high-quality counterfactual descriptions efficiently. Evaluation of representative video-language understanding models confirms their deficiency in temporal understanding, revealing the need for greater emphasis on the temporal elements in video-language research.

Generalization of imitation-learned navigation policies to environments unseen in training remains a major challenge. We address this by conducting the first large-scale study of how data quantity and data diversity affect real-world generalization in end-to-end, map-free visual navigation. Using a curated 4,565-hour crowd-sourced dataset collected across 161 locations in 35 countries, we train policies for point goal navigation and evaluate their closed-loop control performance on sidewalk robots operating in four countries, covering 125 km of autonomous driving. Our results show that large-scale training data enables zero-shot navigation in unknown environments, approaching the performance of policies trained with environment-specific demonstrations. Critically, we find that data diversity is far more important than data quantity. Doubling the number of geographical locations in a training set decreases navigation errors by ~15%, while performance benefit from adding data from existing locations saturates with very little data. We also observe that, with noisy crowd-sourced data, simple regression-based models outperform generative and sequence-based architectures. We release our policies, evaluation setup and example videos on the project page.

Physical interaction quality is central to deformable-object manipulation, yet most benchmarks evaluate task success alone. A policy may complete the task while allowing slip or causing excessive compression. A primary bottleneck is the absence of visuo-tactile datasets that pair policy-visible contact observations with independent physical ground truth over complete tasks. We introduce SoftVTBench, a visuo-tactile dataset for physical-interaction-aware deformable-object manipulation. It contains 4,000 expert demonstrations and more than 50 assets, including volumetric deformable objects and visually matched rigid twins. At 20 Hz, each episode synchronizes multi-view RGB, dual-finger tactile RGB and marker motion, proprioception, language, and binary and continuous gripper actions, alongside evaluator-only finite-element (FEM) states. Building upon this dataset, we establish a closed-loop benchmark that uses fixed object-specific calibration to define the Deformation-aware Success Rate (DSR), which counts a rollout as successful only when it completes the task and keeps peak normalized deformation within tolerance. Across Diffusion Policy, π_{0.5}, and FastWAM, all 12 in-distribution configurations contain successful rollouts that violate the deformation tolerance, accounting for 0.7--24% of each configuration's successes. Under distribution shift, visuo-tactile variants achieve higher task success in all six policy--suite comparisons and higher DSR in five, whereas their in-distribution benefits are mixed. These results show that making touch available does not by itself ensure effective multimodal fusion. SoftVTBench therefore provides a common visuo-tactile resource for studying not only whether a policy succeeds, but how it physically interacts with deformable objects and when touch improves that interaction.

Generalized self-concordance is a key property present in the objective function of many important learning problems. We establish the convergence rate of a simple Frank-Wolfe variant that uses the open-loop step size strategy gamma_t = 2/(t+2), obtaining a O(1/t) convergence rate for this class of functions in terms of primal gap and Frank-Wolfe gap, where t is the iteration count. This avoids the use of second-order information or the need to estimate local smoothness parameters of previous work. We also show improved convergence rates for various common cases, e.g., when the feasible region under consideration is uniformly convex or polyhedral.

Post-training a frontier model is normally weeks of human work: proposing data and recipe changes, launching runs, reading evals, deciding what to keep. We report an autonomous system that runs this loop with no human in the loop, post-training a 30B Nemotron across four rounds over multiple weeks. The autonomously produced model reaches a held-out score of 0.86 against the top human submission's 0.87 on the public NVIDIA Nemotron-Reasoning Challenge leaderboard, placing 8th of ~4000 at the time of writing. More striking than the number: the loop detected that its own dev metric had stopped tracking external performance on the weakest domain -- candidates drove dev to record highs without moving the external target -- and revised its own search policy, no longer maximizing dev but seeking interventions that lowered the now-misleading proxy while improving the external target. We treat this as direct, auditable evidence that a scaled autonomous loop can produce discovery, not only optimization: it detected that its measurement frame had become misleading and changed what counted as evidence. We take the operational view that any system worth the "recursive self-improvement" label must eventually perform end-to-end post-training of a frontier-class model; this is one datapoint of that bar being cleared. We do not claim a "first autonomous match" of human researchers. The claim we make is narrower and auditable: to our knowledge, this is the first publicly reported autonomous post-training run at this scale, where prior public autonomous-ML-research demonstrations sit at GPT-2-class (~124M) budgets. The same system also post-trains the 120B and 550B Nemotron; with no public human baseline there, this shows only that the loop closes at that scale, not that its output is competitive -- infrastructure evidence, with the effectiveness claim deferred until a comparable human anchor exists.

We present an improvement in the ability to meaningfully track features in high speed videos of Caribbean steelpan drums illuminated by Electronic Speckle Pattern Interferometry (ESPI). This is achieved through the use of up-to-date computer vision libraries for object detection and image segmentation as well as a significant effort toward cleaning the dataset previously used to train systems for this application. Besides improvements on previous metric scores by 10% or more, noteworthy in this project are the introduction of a segmentation-regression map for the entire drum surface yielding interference fringe counts comparable to those obtained via object detection, as well as the accelerated workflow for coordinating the data-cleaning-and-model-training feedback loop for rapid iteration allowing this project to be conducted on a timescale of only 18 days.

The rapid development of large language models (LLMs) has renewed interest in agent-based modeling (ABM). However, current LLM-based ABM research faces several key challenges: modeling evolving agent-environment interactions, enabling flexible counterfactual reasoning, and automating simulation workflows for scientific research. In this paper, we propose Eco3S, a socio-economic system simulation framework for economic research and policy analysis that addresses these challenges through three key mechanisms: (1) Co-evolving Environment Design, a bidirectional feedback loop where agents and the environment co-evolve, producing realistic emergent behaviors; (2) Structural Causal Simulation, a structural causal model (SCM)-inspired counterfactual mechanism that allows flexible interventions for diverse causal inference tasks; (3) Simulation-Analysis-Refinement Paradigm, a self-corrective mechanism that iteratively refines experimental designs based on prior simulation results. Experiments on diverse economic scenarios confirm Eco3S's effectiveness in replicating multiple established economic studies (canal decay, origins of governance, and information propagation) and phenomena across domains. Additional results further demonstrate its scalability and generalizability, highlighting the framework's potential for rigorous economic research and policy-making.

Urban uncrewed aerial vehicle (UAV) vision-language navigation (VLN) requires agents to follow instructions across extended urban spaces, inherently demanding long-term memory and geospatial grounding. However, scaling existing benchmarks remains difficult because of their reliance on costly reconstructed 3D assets, limiting geographic diversity and episode scale. To address this, we introduce SatNav, a scalable, long-horizon UAV VLN benchmark built from high-resolution satellite imagery. SatNav targets city-level navigation missions and uses satellite crops as approximations of UAV nadir views for visual observations. Through an automated cue-to-episode pipeline, SatNav constructs 118K episodes from 59 scenes across 18 cities, with an average trajectory length of 379 m. To stress-test long-horizon memory and geospatial reasoning, SatNav defines three task families: Boundary, Landmark, and Route, targeting loop progress tracking, landmark-based spatial grounding, and route following with counting cues. Benchmarking classical VLN agents and recent agents based on large vision-language models (LVLMs) on SatNav shows that city-scale navigation remains challenging. We further introduce SwiftVLN, a modular framework with switchable memory components, and conduct systematic memory-design ablations. Finally, satellite-to-UAV transfer experiments show that satellite-trained navigation models can operate on real-flight UAV observations, showing the practical relevance of SatNav. Our project page: https://eku127.github.io/SatNav/

Loop invariants are fundamental to reasoning about programs with loops. They establish properties about a given loop's behavior. When they additionally are inductive, they become useful for the task of formal verification that seeks to establish strong mathematical guarantees about program's runtime behavior. The inductiveness ensures that the invariants can be checked locally without consulting the entire program, thus are indispensable artifacts in a formal proof of correctness. Finding inductive loop invariants is an undecidable problem, and despite a long history of research towards practical solutions, it remains far from a solved problem. This paper investigates the capabilities of the Large Language Models (LLMs) in offering a new solution towards this old, yet important problem. To that end, we first curate a dataset of verification problems on programs with loops. Next, we design a prompt for exploiting LLMs, obtaining inductive loop invariants, that are checked for correctness using sound symbolic tools. Finally, we explore the effectiveness of using an efficient combination of a symbolic tool and an LLM on our dataset and compare it against a purely symbolic baseline. Our results demonstrate that LLMs can help improve the state-of-the-art in automated program verification.

Coding agent infrastructure is shifting from harness engineering toward loop engineering as coding agents are deployed for sustained long-horizon software development. Existing benchmarks often center on localized tasks or end-state outcomes, offering limited insight into sustained execution. We introduce LOOPSBENCH, a long-horizon benchmark for loop engineering in coding agent evaluation. Each task is a dependency DAG over separately testable development units with source-evidenced prerequisite edges. LOOPSBENCH comprises 112 tasks from authentic sources spanning 8 programming languages and 9 domains. Its flow-aware runtime releases tests along the ready frontier and retains completed nodes as regression obligations. We evaluate frontier coding agents paired with widely used loop implementations. The strongest configuration, Opus-4.7 with Claude Code and outer continuation, resolves 25.00% of tasks. Recorded plans recover only part of the source-recovered prerequisite DAG, and regression events remain visible across the evaluated loop profiles. We open source the benchmark data and code, including all tasks, more than 5,300 development units, and executable tests, at microsoft/Loopsbench.

Loop Engineering is emerging as a practice for organizing development work around coding agents. Instead of writing each prompt by hand, practitioners design loops that monitor progress, assign work, run checks, and decide what the agent should do next. Even with a capable coding agent, a loop may trust a stale progress note, skip needed verification, spend its budget in the wrong direction, or stop before the task is safe to submit. Yet the final outcome of one end-to-end run cannot tell whether success or failure reflects the loop's guidance or the coding agent's ability to carry out the task. We introduce LoopArena, a benchmark for evaluating how well one model can guide a separate coding agent through a long-running task. The model under evaluation is the Controller: after each coding round, it receives a structured summary of the run and instructs a separate, fixed coding agent, the Worker, on what to do or verify next, or decides whether to stop. LoopArena evaluates this ability in three complementary settings that differ in execution scope and cost. Type I scores next-step Loop Contract selection through execution-validated questions without running the Worker at evaluation time. Type II executes repeated control over a selected slice of a full task, while Type III evaluates the paired full task from its original state. On full tasks, the best observed Strict Success Rate is 24.69\%, leaving substantial room for improvement in long-horizon loop control. Across Controllers, the paired reduction in estimated inference cost averages 64.4\%, and Type II produces a similar ordering under the main Core criterion (Spearman's \(ρ=0.9747\)). We release the benchmark data and evaluation code at https://github.com/AMAP-ML/LoopArena .

We study auto research as a closed empirical loop driven by external measurement. Each submitted trial carries a hypothesis, an executable code edit, an evaluator-owned outcome, and feedback that shapes the next proposal. The output is not a generated paper or a single model checkpoint, but an auditable trajectory of proposals, code diffs, experiments, scores, and failure labels. We instantiate this loop with specialist agents that partition recipe surfaces and share measured lineage across trials. The central empirical finding is that lineage feedback lets agents turn evaluator outcomes, including crashes, budget overruns, size failures, and accuracy-gate misses, into later program-level recipe edits rather than one-shot suggestions. Across 1,197 headline-run trials plus 600 Parameter Golf control trials after one-time setup and launch, humans did not choose proposals, edit recipes, override scores, or repair failed trials during the search. In the three headline runs, the same submitted-trial loop reduces Parameter Golf validation bpb by 0.81%, raises NanoChat-D12 CORE by 38.7%, and reduces CIFAR-10 Airbench96 wallclock by 4.59%, with each task measured by its own external evaluator and legality checks. The trace includes a strict architecture-domain audit of 157 headline-run submissions and program rewrites such as a NanoChat attention-kernel path change. Within this scope the loop autonomously writes code, submits experiments, absorbs feedback, applies and combines known techniques inside each environment, and improves public starting recipes.

In mid-2026 a slogan reorganized how practitioners talk about coding agents: stop prompting your agent, start designing the loop that prompts it. We take this claim seriously and give it a careful treatment. We call the object of the new practice the loop specification: a bounded, reusable artifact, made of a trigger, a goal, a verification step, a stopping rule and a memory, that a human hands to an agent harness (such as Claude Code or Codex) so the agent pursues a goal on its own, in place of step-by-step prompting. We distinguish this external loop specification from two things it is often confused with: an ordinary programming loop, and the internal perceive-act-observe cycle that the harness already provides as plumbing. We position loop engineering as a new layer in the progression from prompt to context to harness to loop, and we argue, against the stronger headlines, that it does not retire prompt engineering; loop and prompt are distinct tools with distinct uses. We offer four contributions: a definition and scope for the discipline; an anatomy and taxonomy of loop specifications organized around trigger, goal type, a five-level verification ladder, architecture, and named terminal states; a descriptive analysis of the Loop Library, a public corpus of fifty real loops that we code by hand; and a set of design principles and anti-patterns grounded in the scientific literature on self-correction, reward hacking and model-as-judge fragility. The corpus shows that practice has matured most where the discipline says it matters: seventy percent of loops verify in the autonomous zone of the ladder and seventy-four percent name their terminal states, while automated triggering and durable memory remain comparatively underdeveloped. We close with the limits the practice must respect, including the verification burden, comprehension debt and the risk of cognitive surrender.

We measure how much one extra recurrence is worth to a looped (depth-recurrent) language model, in equivalent unique parameters. From an iso-depth sweep of 116 pretraining runs across recurrence counts r in {1, 2, 4, 8} spanning {sim}50times in training compute, we fit a joint scaling law L = E + A,(N_once + r^φ N_rec)^{-α} + B,D^{-β} and recover a new recurrence-equivalence exponent φ= 0.46. Intuitively, φ tells us whether looping a block r times is equivalent in validation loss to r unique blocks of a non-looped model (full equivalence, φ{=}1) or to a single block run repeatedly with no capacity gain (φ{=}0). Our φ= 0.46 sits in between, so each additional recurrence predictably increases validation loss at matched training compute. For example, at r{=}4 a 410M looped model performs on par with a 580M non-looped model, but incurs the training cost of a 1B non-looped one. We demonstrate the utility of φ as a measurement tool on two probes. Truncated backpropagation lowers φ to 0.38, indicating that the loop mechanism is poorly trained under truncation, even though validation loss decreases. Conversely, hyperconnections raise φ to 0.65, a genuine capacity gain. Our method applies to any looped LM and separates true loop improvements from token-budget gains.

Generalised object counting aims to estimate the number of instances of an arbitrary object category from a single image, but many recent methods can struggle on structurally complex objects due to limited spatial modelling. We present UpCount, a class-agnostic counter designed to better preserve spatial structure. UpCount strengthens the visual representation by extracting multi-layer features from a ViT-B/16 encoder and reassembling them into a refined multi-scale pyramid that is spatially refined using Dense Prediction Transformers and FeatUp, yielding features with improved structural and spatial sensitivity; a proposal--verification counting head then identifies repeated patterns and produces a density map for the final count. On FSC-147, UpCount achieves 12.39 MAE and 100.89 RMSE on the test set, and it transfers effectively to vehicle counting on CARPK (6.27 MAE, 8.79 RMSE). Code: https://github.com/r28112072-rgb/upcount

Language-model agents that run long tasks often redo work they have already done: they re-issue a tool call they made earlier and get back exactly the same observation, a step that adds no new information. We identify this failure as a loop. Loops appear natively in Qwen, Llama, and Gemini agents and become far more common once the agent's history is compressed to fit its context window. To reduce these loops, we propose DeLoop, a self-supervised training method. DeLoop builds on a simple observation: the agent's own rollout can provide the supervision needed to learn from its loops. We use a looping action as a negative example and the first later non-looping action in the same rollout as a positive example. DeLoop learns from these pairs through direct preference optimization and does not require task rewards, gold answers, or LLM judges. On CodeGym under compression, DeLoop reduces the share of Qwen3-8B tasks containing loops from 57.3% to 6.1%. It also uses about one third as many steps per task, with similar task success. On Qwen3-32B, DeLoop reduces loops and steps while raising task success from 37.7% to 44.8%.

Iterative repair loops have become a core design pattern in LLM-based software engineering systems. These workflows repeatedly generate, validate, and repair artifacts using feedback such as compiler errors or test failures. Despite their widespread use, the impact of repair-loop iteration limits remains poorly understood, as most prior work adopts fixed, often arbitrary, repair budgets. We study repair-loop effectiveness across multiple software engineering tasks, including code generation, test generation, and code translation. Across several representative workflows, datasets, and contemporary low-cost LLMs, we observe a consistent pattern of diminishing returns: the first three to four repair iterations account for most achievable gains, while later iterations contribute only marginal improvements. We further find that repair behavior is influenced more strongly by workflow orchestration and feedback design than by the underlying model itself. These results suggest that repair budgets should be treated as an explicit experimental variable, as they directly affect evaluation outcomes, computational cost, runtime, and reproducibility in LLM-based software engineering research.

Scaling Transformer-based click-through rate (CTR) models by stacking more parameters brings growing computational and storage overhead, creating a widening gap between scaling ambitions and the stringent industrial deployment constraints. We propose LoopCTR, which introduces a loop scaling paradigm that increases training-time computation through recursive reuse of shared model layers, decoupling computation from parameter growth. LoopCTR adopts a sandwich architecture enhanced with Hyper-Connected Residuals and Mixture-of-Experts, and employs process supervision at every loop depth to encode multi-loop benefits into the shared parameters. This enables a train-multi-loop, infer-zero-loop strategy where a single forward pass without any loop already outperforms all baselines. Experiments on three public benchmarks and one industrial dataset demonstrate state-of-the-art performance. Oracle analysis further reveals 0.02--0.04 AUC of untapped headroom, with models trained with fewer loops exhibiting higher oracle ceilings, pointing to a promising frontier for adaptive inference.

We propose a novel framework for interactive class-agnostic object counting, where a human user can interactively provide feedback to improve the accuracy of a counter. Our framework consists of two main components: a user-friendly visualizer to gather feedback and an efficient mechanism to incorporate it. In each iteration, we produce a density map to show the current prediction result, and we segment it into non-overlapping regions with an easily verifiable number of objects. The user can provide feedback by selecting a region with obvious counting errors and specifying the range for the estimated number of objects within it. To improve the counting result, we develop a novel adaptation loss to force the visual counter to output the predicted count within the user-specified range. For effective and efficient adaptation, we propose a refinement module that can be used with any density-based visual counter, and only the parameters in the refinement module will be updated during adaptation. Our experiments on two challenging class-agnostic object counting benchmarks, FSCD-LVIS and FSC-147, show that our method can reduce the mean absolute error of multiple state-of-the-art visual counters by roughly 30% to 40% with minimal user input. Our project can be found at https://yifehuang97.github.io/ICACountProjectPage/.

Looped Transformers introduce recurrent depth as a new scaling axis for LLMs: by repeatedly applying shared Transformer blocks, they increase effective depth without increasing parameter count. However, the benefits of looping remain unclear for large MoE LLMs under FLOPs-matched comparisons. The main reason is that the gains from additional iterations diminish quickly and can even turn into degradation, so the extra FLOPs spent on looping yield little substantial improvement. Consequently, prior work typically settles on two loops. We identify two main obstacles to scaling looped MoE. First, looping inherits and amplifies the curse of depth: hidden-state variance grows with each iteration as residual updates accumulate, which destabilizes deep recurrence and causes representations to drift. Second, looped MoE suffers from expert selection collapse: routers repeatedly select the same experts across loops, so extra iterations add computation without adding computational diversity. Guided by this diagnosis, we propose LOOM, built on a single principle: each loop should contribute new computation while keeping the recurrent state stable. LOOM stabilizes recurrence by scaling residual updates to bound variance growth and re-injecting the input embedding at every loop, and diversifies it through per-loop routers that engage different experts and a Looping Residual that carries earlier outputs forward. Experiments across 100M-1.7B models show stable scaling to 9-12 loops. Under near-iso-FLOP, the 700M model performs best at 5 loops, reducing perplexity from 18.36 to 16.54 and improving average zero-shot accuracy from 38.84% to 39.53% over the non-looped baseline. Without FLOP matching, the 1.7B model trained on 60B tokens peaks at 9 loops, reducing perplexity from 9.62 to 7.77 and improving average zero-shot accuracy from 42.4% to 47.7%. Code is available https://github.com/hed-ucas/LOOM.

Advanced compiler technology is crucial for enabling machine learning applications to run on novel hardware, but traditional compilers fail to deliver performance, popular auto-tuners have long search times and expert-optimized libraries introduce unsustainable costs. To address this, we developed LoopTune, a deep reinforcement learning compiler that optimizes tensor computations in deep learning models for the CPU. LoopTune optimizes tensor traversal order while using the ultra-fast lightweight code generator LoopNest to perform hardware-specific optimizations. With a novel graph-based representation and action space, LoopTune speeds up LoopNest by 3.2x, generating an order of magnitude faster code than TVM, 2.8x faster than MetaSchedule, and 1.08x faster than AutoTVM, consistently performing at the level of the hand-tuned library Numpy. Moreover, LoopTune tunes code in order of seconds.

Looped Language Models (LoopLMs) offer a parameter efficient approach to scaling reasoning by reusing shared parameters across recurrent computation steps. Despite their promise, effective post-training of LoopLMs remains challenging. Existing approaches either provide reward based supervision that is sparse or costly to extend across loops, or rely on external teachers or privileged information, leading to limited teacher availability or teacher-student context mismatch. To address these limitations, we introduce LoopOPD, a cross-loop on-policy distillation framework that uses additional recurrent computation within a LoopLM as its own source of supervision. LoopOPD uses a frozen terminal loop policy as a compute privileged teacher for an intermediate loop student on student generated rollouts, providing dense supervision without an external teacher or privileged information. We further propose Dynamic LoopOPD (D-LoopOPD), which continually refreshes the terminal loop teacher as the shared model parameters are updated, enabling recurrent self-improvement. We characterize how distillation updates propagate across loop depths and derive sufficient conditions under which a single update yields simultaneous local improvement at both loop depths. Experiments on Ouro-Thinking models show that LoopOPD improves mathematical reasoning, while D-LoopOPD yields further gains through dynamic teacher updates. Despite being trained only on mathematical data, the resulting models also improve on general reasoning and code generation benchmarks, demonstrating that recurrent computation can serve as an effective source of supervision for LoopLMs. Our code and model checkpoints will be released upon acceptance.

Looped language models (LoopLMs) improve parameter efficiency by recursively reusing Transformer blocks, enabling deeper computation under a fixed model size. However, this reuse makes LoopLMs more fragile under post-training quantization (PTQ). We present the first systematic study of quantization in LoopLMs and identify three challenges: distribution shift across roles, state reuse across loop transitions, and recursive error accumulation. To address these challenges, we propose LoopQ, a loop-aware PTQ framework that preserves a shared quantized backbone while introducing lightweight adaptations. LoopQ combines activation scaling, selective transformation, cross-loop state alignment, and trajectory-aware optimization to reduce distributional mismatch within loops and error accumulation across loops. Experiments across seven benchmarks show that, under W4A4 quantization, LoopQ improves average downstream accuracy by 68.8% and reduces average perplexity by 87.7% compared with the strongest static PTQ baseline.

Large vision-language models (VLMs) can recognize what happens in video but fail to count how many times. We introduce PushupBench, 446 long-form clips (avg. 36.7s) for evaluating repetition counting. The best frontier model achieves 42.1\% exact accuracy; open-source 4B models score sim6\%, matching supervised baselines. We show that accuracy alone misleads -- weaker models exploit the modal count rather than reason temporally. Fine-tuning on counting with 1k samples transfers to general video understanding: MVBench (+2.15), PerceptionTest (+1.88), TVBench (+4.54), suggesting counting is a proxy for broader temporal reasoning.PushupBench incorporated in lmms-eval (https://github.com/EvolvingLMMs-Lab/lmms-eval/pull/1262) and hosted on (pushupbench.com/)

Synthesizing inductive loop invariants is fundamental to automating program verification. In this work, we observe that Large Language Models (such as gpt-3.5 or gpt-4) are capable of synthesizing loop invariants for a class of programs in a 0-shot setting, yet require several samples to generate the correct invariants. This can lead to a large number of calls to a program verifier to establish an invariant. To address this issue, we propose a {\it re-ranking} approach for the generated results of LLMs. We have designed a ranker that can distinguish between correct inductive invariants and incorrect attempts based on the problem definition. The ranker is optimized as a contrastive ranker. Experimental results demonstrate that this re-ranking mechanism significantly improves the ranking of correct invariants among the generated candidates, leading to a notable reduction in the number of calls to a verifier.

The flexibility and accuracy of methods for automatically counting objects in images and videos are limited by the way the object can be specified. While existing methods allow users to describe the target object with text and visual examples, the visual examples must be manually annotated inside the image, and there is no way to specify what not to count. To address these gaps, we introduce novel capabilities that expand how the target object can be specified. Specifically, we extend the prompt to enable what not to count to be described with text and/or visual examples, introduce the concept of `pseudo-exemplars' that automate the annotation of visual examples at inference, and extend counting models to accept visual examples from both natural and synthetic external images. We also use our new counting model, CountGD++, as a vision expert agent for an LLM. Together, these contributions expand the prompt flexibility of multi-modal open-world counting and lead to significant improvements in accuracy, efficiency, and generalization across multiple datasets. Code is available at https://github.com/niki-amini-naieni/CountGDPlusPlus.

Complex numerical time series analysis often demands multi-step reasoning capabilities beyond current models' reach. Tasks like medical diagnosis and weather forecasting require sequential reasoning processes - including counterfactual analysis, logical deduction, knowledge application, and multi-modal contextual integration - that existing time series models cannot explicitly perform. While recent research has shown large language models (LLMs) can achieve sophisticated Chain-of-Thought (CoT) reasoning through reinforcement learning (RL), these advances have primarily focused on mathematical and coding domains, with LLMs still demonstrating poor performance on time series tasks. We introduce Chain Of thought for Understanding Numerical Time Series (COUNTS), the first framework that trains LLMs to perform CoT reasoning across diverse time series tasks using RL with verifiable rewards. Our approach employs a Residual Vector-Quantized VAE to create high-fidelity discrete tokens that seamlessly integrate into a pre-trained LLM's vocabulary. COUNTS undergoes a two-stage training process: first, supervised fine-tuning on time series analysis tasks to master our novel representations, followed by Group Relative Policy Optimization training on verifiable problems using prompting strategies that encourage explicit reasoning steps before producing final answers. Our experiments demonstrate that this RL-driven approach with intermediate CoT reasoning significantly enhances LLM performance across various time series analysis tasks, opening new possibilities for complex temporal data reasoning.

Ask SD3.5-Medium for twelve of an object and then, from the same starting noise, for twenty-five. The picture keeps its layout, but the count changes about as much as it would under a new random seed, and in no consistent direction. We study what number words do once a request passes about ten objects, in five open text-to-image models. Holding the object and the starting noise fixed, we change one thing at a time, and people who never see the request count 3,088 of the images. Every model follows the number for small crowds, but only up to a point, its reach: SD3.5-M and FLUX.1-dev stop following it soon after ten, while FLUX.2 [klein] and Qwen-Image follow it loosely up to twenty-five. Beyond SD3.5-M's reach, the coarse part of the starting noise fixes the composition of the picture but not how many objects it holds: redrawing only the noise finer than an eighth of the image keeps the layout as well as a new number does, and already moves the count two-thirds as far. The number word still reaches the denoiser and acts in its first steps, but nothing we tried gives it a clear direction. Shown instead as a noised grid in the starting latent, the count is drawn: people find it in 59% of images, against 4% when it is only told. Past ten, an exact-match score barely separates a model that follows the number loosely from one that ignores it, and a relative-error score can even prefer a constant guess of sixteen. A same-noise test with a few requests per object tells them apart.

Existing works on visual counting primarily focus on one specific category at a time, such as people, animals, and cells. In this paper, we are interested in counting everything, that is to count objects from any category given only a few annotated instances from that category. To this end, we pose counting as a few-shot regression task. To tackle this task, we present a novel method that takes a query image together with a few exemplar objects from the query image and predicts a density map for the presence of all objects of interest in the query image. We also present a novel adaptation strategy to adapt our network to any novel visual category at test time, using only a few exemplar objects from the novel category. We also introduce a dataset of 147 object categories containing over 6000 images that are suitable for the few-shot counting task. The images are annotated with two types of annotation, dots and bounding boxes, and they can be used for developing few-shot counting models. Experiments on this dataset shows that our method outperforms several state-of-the-art object detectors and few-shot counting approaches. Our code and dataset can be found at https://github.com/cvlab-stonybrook/LearningToCountEverything.

Turning a frontier vision-language model into a robot policy usually means fine-tuning it to emit an action representation it never saw in pretraining, which throws away much of the reasoning that made the model worth reaching for. We go the other way and keep the VLM frozen. It writes the policy as a short Python control function, with no demonstrations and no fine-tuning. Writing that code once is open-loop, though. Existing closed-loop methods react at the wrong level: they retry a fixed policy or pick a different subtask, but never rewrite the code that failed. VLCP closes the loop where the failure actually lives, on the control code, within a single episode. Every K steps the VLM re-observes the scene from multi-view RGB, proprioceptive state, and a state delta, then rewrites the control function from what it just saw, so a failure is caught before it compounds. We evaluate on a 57-task MuJoCo/RoboVerse sweep. This training-free policy reaches 35.1% pooled success, against 3.5% for the identical system queried once per episode. That tenfold gap holds with non-overlapping confidence intervals in every scene family. The gain traces to a 27.3% within-episode recovery rate on failed grasps: a miss an open-loop controller would carry to the end of the episode gets re-observed and fixed at the next replan. And the loop stays cheap. A median 84% of input tokens hit cache, an episode needs only about 10 compact queries, and control blocks written during any replan persist to a cross-episode skill library reused in later prompts.

Video understanding requires models to continuously track and update world state during playback. Although existing benchmarks have advanced video understanding evaluation across multiple dimensions, they provide limited visibility into how models maintain world state over time. We propose SVCBench, a Streaming Video Counting Benchmark that repositions counting as a minimal, controlled probe for diagnosing models' world-state maintenance capability. We decompose this capability into object counting and event counting, forming 8 fine-grained subcategories. Object counting covers tracking currently visible objects and cumulative unique identities, while event counting covers detecting instantaneous actions and tracking complete activity cycles. SVCBench contains 406 videos with frame-by-frame annotations of 10,071 event occurrences and object state changes, yielding 1,000 streaming QA pairs with 4,576 query points distributed along video timelines. By observing state maintenance trajectories through streaming multi-point queries, we design three complementary metrics to diagnose numerical precision, trajectory consistency, and temporal awareness. Evaluations of mainstream video-language models show that current models still exhibit significant deficiencies in spatial-temporal state maintenance, with especially poor performance on periodic event counting. SVCBench provides a diagnostic framework for measuring and improving state maintenance in video understanding systems. Our code and data are available at https://buaa-colalab.github.io/SVCBench.

The CLIP (Contrastive Language-Image Pretraining) model has exhibited outstanding performance in recognition problems, such as zero-shot image classification and object detection. However, its ability to count remains understudied due to the inherent challenges of transforming counting--a regression task--into a recognition task. In this paper, we investigate CLIP's potential in counting, focusing specifically on estimating crowd sizes. Existing classification-based crowd-counting methods have encountered issues, including inappropriate discretization strategies, which impede the application of CLIP and result in suboptimal performance. To address these challenges, we propose the Enhanced Blockwise Classification (EBC) framework. In contrast to previous methods, EBC relies on integer-valued bins that facilitate the learning of robust decision boundaries. Within our model-agnostic EBC framework, we introduce CLIP-EBC, the first fully CLIP-based crowd-counting model capable of generating density maps. Comprehensive evaluations across diverse crowd-counting datasets demonstrate the state-of-the-art performance of our methods. Particularly, EBC can improve existing models by up to 76.9%. Moreover, our CLIP-EBC model surpasses current crowd-counting methods, achieving mean absolute errors of 55.0 and 6.3 on ShanghaiTech part A and part B datasets, respectively. The code will be made publicly available.

Despite progress in video understanding, current MLLMs struggle with counting tasks. Existing benchmarks are limited by short videos, close-set queries, lack of clue annotations, and weak multimodal coverage. In this paper, we introduce CG-AV-Counting, a manually-annotated clue-grounded counting benchmark with 1,027 multimodal questions and 5,845 annotated clues over 497 long videos. It supports both black-box and white-box evaluation, serving as a comprehensive testbed for both end-to-end and reasoning-based counting. To explore ways to improve model's counting capability, we propose AV-Reasoner, a model trained with GRPO and curriculum learning to generalize counting ability from related tasks. AV-Reasoner achieves state-of-the-art results across multiple benchmarks, demonstrating the effectiveness of reinforcement learning. However, experiments show that on out-of-domain benchmarks, reasoning in the language space fails to bring performance gains. The code and benchmark have been realeased on https://av-reasoner.github.io.

Large language models perform strongly on benchmarks in mathematical reasoning, coding and document analysis, suggesting a broad ability to follow instructions. However, it remains unclear whether such success reflects general logical competence, repeated application of learned procedures, or pattern matching that mimics rule execution. We investigate this question by introducing Stable Counting Capacity, an assay in which models count repeated symbols until failure. The assay removes knowledge dependencies, semantics and ambiguity from evaluation, avoids lexical and tokenization confounds, and provides a direct measure of procedural reliability beyond standard knowledge-based benchmarks. Here we show, across more than 100 model variants, that stable counting capacity remains far below advertised context limits. Model behavior is consistent neither with open-ended logic nor with stable application of a learned rule, but instead with use of a finite set of count-like internal states, analogous to counting on fingers. Once this resource is exhausted, the appearance of rule following disappears and exact execution collapses into guessing, even with additional test-time compute. These findings show that fluent performance in current language models does not guarantee general, reliable rule following.

Language models are increasingly used in scientific discovery to generate hypotheses, propose candidate solutions, implement systems, and iteratively refine them. At the core of these trial-and-error loops lies evaluation: the process of obtaining feedback on candidate solutions via verifiers, simulators, or task-specific scoring functions. While prior work has highlighted the importance of evaluation, it has not explicitly formulated the problem of how evaluation-driven discovery loops can be scaled up in a principled and effective manner to push the boundaries of scientific discovery, a problem this paper seeks to address. We introduce Simple Test-time Evaluation-driven Scaling (SimpleTES), a general framework that strategically combines parallel exploration, feedback-driven refinement, and local selection, revealing substantial gains unlocked by scaling evaluation-driven discovery loops along the right dimensions. Across 21 scientific problems spanning six domains, SimpleTES discovers state-of-the-art solutions using gpt-oss models, consistently outperforming both frontier-model baselines and sophisticated optimization pipelines. Particularly, we sped up the widely used LASSO algorithm by over 2x, designed quantum circuit routing policies that reduce gate overhead by 24.5%, and discovered new Erdos minimum overlap constructions that surpass the best-known results. Beyond novel discoveries, SimpleTES produces trajectory-level histories that naturally supervise feedback-driven learning. When post-trained on successful trajectories, models not only improve efficiency on seen problems but also generalize to unseen problems, discovering solutions that base models fail to uncover. Together, our results establish effective evaluation-driven loop scaling as a central axis for advancing LLM-driven scientific discovery, and provide a simple yet practical framework for realizing these gains.

Large vision-language models (VLMs) are shown to learn rich joint image-text representations enabling high performances in relevant downstream tasks. However, they fail to showcase their quantitative understanding of objects, and they lack good counting-aware representation. This paper conducts a reproducibility study of 'Teaching CLIP to Count to Ten' (Paiss et al., 2023), which presents a method to finetune a CLIP model (Radford et al., 2021) to improve zero-shot counting accuracy in an image while maintaining the performance for zero-shot classification by introducing a counting-contrastive loss term. We improve the model's performance on a smaller subset of their training data with lower computational resources. We verify these claims by reproducing their study with our own code. The implementation can be found at https://github.com/SforAiDl/CountCLIP.

Yes. Can it cure doom loops? Probably not. The Gemma 4 instruction-tuned models share a reproducible failure: on long factual enumeration prompts, such as listing every episode of a TV series, the 88 IAU constellations, or the 151 original Pokemon, they collapse into repetition, either a tight verbatim loop or a list whose entries decay onto a single answer. These loops occur at rates as high as 95% and survive prompt rewording, inference-engine changes, and most sampling adjustments. In this paper we explore whether this behavior is localized enough to remove by weight edits. To localize the cause, we use per-layer ablation and per-neuron attribution, then confirm the strongest candidates with full-generation sweeps. The loops trace to a small set of MLP neurons (or, in the 26B-A4B Mixture-of-Experts model, a few routed experts) which we suppress with static weight edits. These "surgeries" can be as small as a single sign-inverted neuron (in the E2B model). The size of the effective edits grows with model scale, but in all cases, the loop patterns can be addressed at normal generation budgets while preserving general-purpose benchmark scores. However, the edits do not solve everything: we also study longer thinking budgets, where the two larger models most visibly enter doom looping, i.e. a non-convergent regime in which the model self-corrects in circles over a fact it cannot recall, exhausting the budget without committing to a final answer. We show this residual failure is reduced but not eliminated by the same edits, and argue it is fundamentally a knowledge-precision problem rather than a removable circuit; weight surgery can delete a loop, but it cannot supply a missing fact. Our results are both a feasibility demonstration, that is, evidence that a concrete generation pathology can be localized to a few parameters and edited out, and a delineation of where that approach stops.

Object counting remains fragmented across domain-specific datasets and task formulations, despite rapid progress in generalist vision models. Existing counting models are often tailored to scenarios such as crowds, vehicles, cells, crops, or remote-sensing objects, and thus struggle to generalize across categories, visual domains, object scales, and density distributions. In this paper, we study text-guided object counting across domains, where a model takes an image and a natural-language query as input and returns an instance-grounded set of target points whose cardinality gives the count. This formulation unifies category-conditioned counting with interpretable spatial localization. To support this setting, we construct CLOC, a Cross-domain Large-scale Object Counting dataset that reorganizes diverse public data sources into a unified benchmark. CLOC covers six visual domains: General Scene, Remote Sensing, Histopathology, Cellular Microscopy, Agriculture, and Microbiology, with about 220K images, 619 categories, and 15M object instances. Based on CLOC, we propose Count Anything, a generalist model for text-guided object counting. Unlike density-map-based methods, which dominate counting models, Count Anything adopts discrete instance points and performs dual-granularity instance enumeration. A Region-level Sparse Counter provides object-level anchors for large and sparse targets, while a Pixel-level Dense Counter handles small, crowded, and weakly bounded targets via dense point prediction. A point-centric supervision strategy enables learning from heterogeneous annotations, and Complementary Count Fusion combines both counters in a parameter-free manner. Extensive experiments show that Count Anything achieves strong accuracy and multi-domain generalization, outperforming existing open-world counting methods. Code is available at: https://github.com/Mengqi-Lei/count-anything.

Looped transformers have emerged as a parameter-efficient alternative to scaling depth for strong reasoning. By reusing one stack of layers across T iterations, they attain the effective depth and reasoning capabilities of larger models at a fixed parameter count. Yet existing approaches suffer from latent overthinking and undifferentiated computation, largely because intermediate representations receive no guidance across loops. Multi-token prediction (MTP) supplies exactly the dense, forward-looking supervision the loop is missing. We propose LoopMTP, which links the two through a structural correspondence in latent space: a model that loops T times can anticipate T future tokens. LoopMTP realizes this by softly aligning the hidden state of loop t with the embedding of the token t steps ahead, while a lightweight gate preserves useful information across iterations. LoopMTP improves average accuracy by up to 8.1\% (relative) over the non-looped baseline, with training remaining stable for up to 15 loops.

Self-improving LLM systems propose changes to themselves and keep those that score better on a small evaluation set. We treat this keep-if-better step as selection under measurement noise, model the correlated errors of the candidates in a single decision, and study empirically what happens when the evaluation set is reused. In runs where Qwen models rewrite their own instructions and every candidate is also scored on 600 held-out items, most proposals after the first are harmful, and the model gives the size of the winner's curse of a generation's best candidate. With a prior from a separate pilot, it matches the average overstatement of first-generation commits in native loops, though not setting by setting. In a pre-registered study, the final selection-set score of greedy loops exceeded held-out accuracy by 13 to 20 points with 16 selection items and by 1 to 5 points with 256. Held-out gains grew with the selection set on TREC but not on GSM8K, and the tested acceptance rules did not beat greedy acceptance over whole runs. Gains measured on the selection set also exceeded held-out gains when a current model refined a competent instruction, and in the validation scores of GEPA and MIPROv2. Scoring the starting and the current instruction on 64 items never used for selection removes the average bias of a loop's reported gain, but single estimates remain off by about 6 points. Self-improvement studies should report held-out gains with their uncertainty.

Visual counting is a fundamental pillar of multimodal intelligence, requiring a seamless integration of fine-grained grounding and spatial reasoning. While Multimodal Large Language Models (MLLMs) have achieved remarkable success in qualitative scene understanding, their quantitative precision remains a significant bottleneck, often characterized by persistent numerical hallucinations. Existing counting benchmarks primarily focus on basic perception in simplified contexts, failing to capture the complex failure modes that emerge under logical constraints or adversarial conditions. To address these limitations, we introduce HoloCount, a holistic and diagnostically rich benchmark structured around a three-level hierarchical taxonomy. HoloCount evaluates MLLMs across: (1) Semantic Counting, focusing on atomic and property-based enumeration; (2) Analytical Counting, assessing logical composition through spatial and set-based reasoning; and (3) Robustness Testing, probing model integrity against adverse scenarios and grounded counter-priors, such as high-density scenes and linguistic biases. Through an exhaustive evaluation of over 20 state-of-the-art MLLMs, we reveal a critical performance gap: even top-tier models degrade significantly as tasks transition from perception to complex analytical reasoning and adverse scenarios. Our findings provide a systematic landscape of current MLLM counting capabilities and offer a roadmap for developing more grounded and reliable multimodal systems. The dataset is available at https://mm-mvr.github.io/HoloCount/.

Augmenting Large Language Models (LLMs) with external tools enables them to execute complex, multi-step tasks. However, tool learning is hampered by the static synthetic data pipelines where data generation and model training are executed as two separate, non-interactive processes. This approach fails to adaptively focus on a model's specific weaknesses and allows noisy labels to persist, degrading training efficiency. We introduce LoopTool, a fully automated, model-aware data evolution framework that closes this loop by tightly integrating data synthesis and model training. LoopTool iteratively refines both the data and the model through three synergistic modules: (1) Greedy Capability Probing (GCP) diagnoses the model's mastered and failed capabilities; (2) Judgement-Guided Label Verification (JGLV) uses an open-source judge model to find and correct annotation errors, progressively purifying the dataset; and (3) Error-Driven Data Expansion (EDDE) generates new, challenging samples based on identified failures. This closed-loop process operates within a cost-effective, open-source ecosystem, eliminating dependence on expensive closed-source APIs. Experiments show that our 8B model trained with LoopTool significantly surpasses its 32B data generator and achieves new state-of-the-art results on the BFCL-v3 and ACEBench benchmarks for its scale. Our work demonstrates that closed-loop, self-refining data pipelines can dramatically enhance the tool-use capabilities of LLMs.

The goal of this paper is to improve the generality and accuracy of open-vocabulary object counting in images. To improve the generality, we repurpose an open-vocabulary detection foundation model (GroundingDINO) for the counting task, and also extend its capabilities by introducing modules to enable specifying the target object to count by visual exemplars. In turn, these new capabilities - being able to specify the target object by multi-modalites (text and exemplars) - lead to an improvement in counting accuracy. We make three contributions: First, we introduce the first open-world counting model, CountGD, where the prompt can be specified by a text description or visual exemplars or both; Second, we show that the performance of the model significantly improves the state of the art on multiple counting benchmarks - when using text only, CountGD is comparable to or outperforms all previous text-only works, and when using both text and visual exemplars, we outperform all previous models; Third, we carry out a preliminary study into different interactions between the text and visual exemplar prompts, including the cases where they reinforce each other and where one restricts the other. The code and an app to test the model are available at https://www.robots.ox.ac.uk/~vgg/research/countgd/.

Object counting has progressed from class-specific models, which count only known categories, to class-agnostic models that generalize to unseen categories. The next challenge is Referring Expression Counting (REC), where the goal is to count objects based on fine-grained attributes and contextual differences. Existing methods struggle with distinguishing visually similar objects that belong to the same category but correspond to different referring expressions. To address this, we propose C-REX, a novel contrastive learning framework, based on supervised contrastive learning, designed to enhance discriminative representation learning. Unlike prior works, C-REX operates entirely within the image space, avoiding the misalignment issues of image-text contrastive learning, thus providing a more stable contrastive signal. It also guarantees a significantly larger pool of negative samples, leading to improved robustness in the learned representations. Moreover, we showcase that our framework is versatile and generic enough to be applied to other similar tasks like class-agnostic counting. To support our approach, we analyze the key components of sota detection-based models and identify that detecting object centroids instead of bounding boxes is the key common factor behind their success in counting tasks. We use this insight to design a simple yet effective detection-based baseline to build upon. Our experiments show that C-REX achieves state-of-the-art results in REC, outperforming previous methods by more than 22\% in MAE and more than 10\% in RMSE, while also demonstrating strong performance in class-agnostic counting. Code is available at https://github.com/cvlab-stonybrook/c-rex.

Multimodal Large Language Models (MLLMs) demonstrate remarkable fluency in understanding visual scenes, yet they exhibit a critical lack in a fundamental cognitive skill: object counting. This blind spot severely limits their reliability in real-world applications. To date, this capability has been largely unevaluated in complex scenarios, as existing benchmarks either feature sparse object densities or are confined to specific visual domains, failing to test models under realistic conditions. Addressing this gap, we introduce CountQA, a challenging new benchmark designed to probe this deficiency. Comprising over 1,500 question-answer pairs, CountQA features real-world images with high object density, clutter, and occlusion. We investigate this weakness by evaluating 15 prominent MLLMs on the CountQA benchmark and reveal that the top-performing model achieves a mere 42.9% accuracy, with performance declining as object counts rise. By providing a dedicated benchmark to diagnose and rectify this core weakness, CountQA paves the way for a new generation of MLLMs that are not only descriptively fluent but also numerically grounded and spatially aware. We will open-source the dataset and code upon paper acceptance to foster further research.

We reformulate the problem of supervised learning as learning to learn with two nested loops (i.e. learning problems). The inner loop learns on each individual instance with self-supervision before final prediction. The outer loop learns the self-supervised task used by the inner loop, such that its final prediction improves. Our inner loop turns out to be equivalent to linear attention when the inner-loop learner is only a linear model, and to self-attention when it is a kernel estimator. For practical comparison with linear or self-attention layers, we replace each of them in a transformer with an inner loop, so our outer loop is equivalent to training the architecture. When each inner-loop learner is a neural network, our approach vastly outperforms transformers with linear attention on ImageNet from 224 x 224 raw pixels in both accuracy and FLOPs, while (regular) transformers cannot run.

Looped transformers and Mixture-of-Experts (MoE) offer complementary routes to efficient scaling: recurrence increases computational depth at fixed parameters, while MoE sparsity expands total capacity at fixed active compute. Yet existing scaling laws model recurrence or sparsity in isolation. In this work, we introduce Loop Scaling Laws, the first scaling law to jointly model recurrence and sparsity alongside model size and data. At its core is a bounded, sparsity-conditional recurrence mapping that characterizes the effective-parameter gain from looping and how sparsity raises this gain. The laws predict the held-out loss of looped models more accurately than prior alternatives, and recover the standard dense and MoE scaling laws as special cases. Beyond prediction, the fitted laws provide a principled foundation for designing looped MoE models under compute and memory constraints. Downstream evaluations further demonstrate the complementary benefits of the two axes: sparsity delivers ~3x active-parameter efficiency, recurrence yields ~2x total-parameter efficiency on reasoning, and joint scaling further advances the performance frontier. As a practical extension, we show these gains hold at trillion-token scale: at matched training compute, a looped MoE with law-derived recurrence matches a ~2x larger non-looped MoE on the reasoning benchmarks, while enabling test-time scaling through recurrence.

With the advent of large language models (LLMs) like GPT-3, a natural question is the extent to which these models can be utilized for source code optimization. This paper presents methodologically stringent case studies applied to well-known open source python libraries pillow and numpy. We find that contemporary LLM ChatGPT-4 (state September and October 2023) is surprisingly adept at optimizing energy and compute efficiency. However, this is only the case in interactive use, with a human expert in the loop. Aware of experimenter bias, we document our qualitative approach in detail, and provide transcript and source code. We start by providing a detailed description of our approach in conversing with the LLM to optimize the _getextrema function in the pillow library, and a quantitative evaluation of the performance improvement. To demonstrate qualitative replicability, we report further attempts on another locus in the pillow library, and one code locus in the numpy library, to demonstrate generalization within and beyond a library. In all attempts, the performance improvement is significant (factor up to 38). We have also not omitted reporting of failed attempts (there were none). We conclude that LLMs are a promising tool for code optimization in open source libraries, but that the human expert in the loop is essential for success. Nonetheless, we were surprised by how few iterations were required to achieve substantial performance improvements that were not obvious to the expert in the loop. We would like bring attention to the qualitative nature of this study, more robust quantitative studies would need to introduce a layer of selecting experts in a representative sample -- we invite the community to collaborate.

Large vision-language models (VLMs), such as CLIP, learn rich joint image-text representations, facilitating advances in numerous downstream tasks, including zero-shot classification and text-to-image generation. Nevertheless, existing VLMs exhibit a prominent well-documented limitation - they fail to encapsulate compositional concepts such as counting. We introduce a simple yet effective method to improve the quantitative understanding of VLMs, while maintaining their overall performance on common benchmarks. Specifically, we propose a new counting-contrastive loss used to finetune a pre-trained VLM in tandem with its original objective. Our counting loss is deployed over automatically-created counterfactual examples, each consisting of an image and a caption containing an incorrect object count. For example, an image depicting three dogs is paired with the caption "Six dogs playing in the yard". Our loss encourages discrimination between the correct caption and its counterfactual variant which serves as a hard negative example. To the best of our knowledge, this work is the first to extend CLIP's capabilities to object counting. Furthermore, we introduce "CountBench" - a new image-text counting benchmark for evaluating a model's understanding of object counting. We demonstrate a significant improvement over state-of-the-art baseline models on this task. Finally, we leverage our count-aware CLIP model for image retrieval and text-conditioned image generation, demonstrating that our model can produce specific counts of objects more reliably than existing ones.

Despite the success of test-time scaling, Large Reasoning Models (LRMs) frequently encounter repetitive loops that lead to computational waste and inference failure. In this paper, we identify a distinct failure mode termed Circular Reasoning. Unlike traditional model degeneration, this phenomenon manifests as a self-reinforcing trap where generated content acts as a logical premise for its own recurrence, compelling the reiteration of preceding text. To systematically analyze this phenomenon, we introduce LoopBench, a dataset designed to capture two distinct loop typologies: numerical loops and statement loops. Mechanistically, we characterize circular reasoning as a state collapse exhibiting distinct boundaries, where semantic repetition precedes textual repetition. We reveal that reasoning impasses trigger the loop onset, which subsequently persists as an inescapable cycle driven by a self-reinforcing V-shaped attention mechanism. Guided by these findings, we employ the Cumulative Sum (CUSUM) algorithm to capture these precursors for early loop prediction. Experiments across diverse LRMs validate its accuracy and elucidate the stability of long-chain reasoning.

Counting serves as a simple but powerful test of a Large Vision-Language Model's (LVLM's) reasoning; it forces the model to identify each individual object and then add them all up. In this study, we investigate how LVLMs implement counting using controlled synthetic and real-world benchmarks, combined with mechanistic analyses. Our results show that LVLMs display a human-like counting behavior, with precise performance on small numerosities and noisy estimation for larger quantities. We introduce two novel interpretability methods, Visual Activation Patching and HeadLens, and use them to uncover a structured "counting circuit" that is largely shared across a variety of visual reasoning tasks. Building on these insights, we propose a lightweight intervention strategy that exploits simple and abundantly available synthetic images to fine-tune arbitrary pretrained LVLMs exclusively on counting. Despite the narrow scope of this fine-tuning, the intervention not only enhances counting accuracy on in-distribution synthetic data, but also yields an average improvement of +8.36% on out-of-distribution counting benchmarks and an average gain of +1.54% on complex, general visual reasoning tasks for Qwen2.5-VL. These findings highlight the central, influential role of counting in visual reasoning and suggest a potential pathway for improving overall visual reasoning capabilities through targeted enhancement of counting mechanisms.

Integer overflow accounts for one of the major source of bugs in software. Verification systems typically assume a well defined underlying semantics for various integer operations and do not explicitly check for integer overflow in programs. In this paper we present a specification mechanism for expressing integer overflow. We develop an automated procedure for integer overflow checking during program verification. We have implemented a prototype integer overflow checker and tested it on a benchmark consisting of already verified programs (over 14k LOC). We have found 43 bugs in these programs due to integer overflow.

In this paper, we consider the problem of generalised visual object counting, with the goal of developing a computational model for counting the number of objects from arbitrary semantic categories, using arbitrary number of "exemplars", i.e. zero-shot or few-shot counting. To this end, we make the following four contributions: (1) We introduce a novel transformer-based architecture for generalised visual object counting, termed as Counting Transformer (CounTR), which explicitly capture the similarity between image patches or with given "exemplars" with the attention mechanism;(2) We adopt a two-stage training regime, that first pre-trains the model with self-supervised learning, and followed by supervised fine-tuning;(3) We propose a simple, scalable pipeline for synthesizing training images with a large number of instances or that from different semantic categories, explicitly forcing the model to make use of the given "exemplars";(4) We conduct thorough ablation studies on the large-scale counting benchmark, e.g. FSC-147, and demonstrate state-of-the-art performance on both zero and few-shot settings.

Looped Mixture-of-Experts (MoE) models combine parameter reuse with sparse computation to improve performance under matched budgets. Prior work demonstrates that different loop visits can play different roles even when they share parameters. To probe the contributions of different loop visits, we learn separate residual coefficients in a model that applies a shared block twice, observing a smaller scale in the first visit. Fixed coefficient experiments show that reducing the first visit's scale preserves or improves performance, whereas the same reductions to the second hurt it. This asymmetry motivates us to explore asymmetric compute allocation. We propose LatentLoop, which compresses the first visit's sequence, retains full resolution in the second, and reallocates saved computation to increase the hidden size. We further learn how strongly the first visit updates the full sequence, and share MoE weights across visits while using separate attention parameters to accommodate their different sequence resolutions. Across 15 configurations spanning 1.3B--7B parameters, with the largest budget exceeding 10^{21} FLOPs, LatentLoop consistently lowers validation NLL. At a fitted NLL of 1.988, predicted compute savings are 19.0\% and 7.9\% relative to vanilla MoE and the looped baseline. It also improves average scores on nine benchmarks at all sizes in 0-shot and 5-shot settings. These results suggest asymmetric compute allocation is a promising direction for looped MoE models.

Object counting is a foundational vision task with over a decade of dedicated research, yet state-of-the-art models still fail systematically in the mixed-object setting that dominates real-world applications such as industrial inspection and product sorting. We show that this gap is strongly driven by limitations in existing training and evaluation data: real counting datasets are prohibitively expensive to annotate and suffer from labeling noise, while existing synthetic alternatives lack diversity and realism. We address this with MixCount, a dataset and benchmark for mixed-object counting designed to target the failure modes of current counting models. To overcome the high cost of constructing and labeling such data, we develop an automatic generation pipeline that synthesizes images, fine-grained textual descriptions, and pixel-perfect counting annotations at scale, eliminating the labeling ambiguity that plagues prior datasets. Evaluating state-of-the-art counting models on MixCount exposes severe degradation in the mixed-object setting. More importantly, training these models on our synthesized data yields substantial gains on real-world benchmarks, reducing MAE by 20.14% on FSC-147 and by 18.3% on PairTally. These results establish MixCount as both a benchmark and a training dataset for fine-grained counting, and demonstrate that our pipeline, which produces effectively unlimited labeled data, helps address a long-standing bottleneck in counting models.

Scaling laws predict how loss decreases with increases in computation. We show, contrary to conventional wisdom, that architectural interventions can modify scaling exponents in pre-training, leading to power-law improvements in performance as computation increases. As an anchoring point, we consider the architectural formulation of looped transformers. Although not typically used in this way, looping, also known as recursive depth, provides a mechanism for model growth, by increasing the number of loops during training. Model growth, with and without shared weights, provides the biggest changes to the scaling exponents. In particular, a 7.4B model growth architecture matches GPT-3 13B on CORE with roughly 20times less compute, and has compute efficiency gains that increase with scale. Moreover, simply using a boundary operator in a vanilla transformer, which normalizes and injects an earlier block, also provides an exponent increase, although to a lesser extent. In the data-constrained, multi-epoch setting, standard looping has a useful regularizing effect, where we find it is compute-optimal to increase the number of loops with scale. These results can be understood through the lens of computational depth: for a given computational budget, we wish to increase the usable depth of the transformer, which can lead to efficiency gains that increase with scale.

Most counting questions in visual question answering (VQA) datasets are simple and require no more than object detection. Here, we study algorithms for complex counting questions that involve relationships between objects, attribute identification, reasoning, and more. To do this, we created TallyQA, the world's largest dataset for open-ended counting. We propose a new algorithm for counting that uses relation networks with region proposals. Our method lets relation networks be efficiently used with high-resolution imagery. It yields state-of-the-art results compared to baseline and recent systems on both TallyQA and the HowMany-QA benchmark.

Agent benchmarks score submissions with outcome verifiers that are typically hand-written and brittle, leaving them open to reward hacking. We audit 1,968 tasks across five terminal-agent benchmarks and find 323 (16%) hackable by frontier models given only the task description. This corrupts both leaderboard rankings and RL training signal, yet the standard response is manual and reactive. We introduce the hacker-fixer loop, a method for building exploit-resistant verifiers without per-task manual patching. The loop alternates three LLM agents: a hacker tries to pass the verifier without solving the task, a fixer patches the verifier to reject each discovered exploit, and a solver confirms the patched verifier still admits legitimate solutions. The loop iterates: each patch reshapes what the verifier rewards, surfacing the next exploit. We further add verifier access, and let patches transfer across tasks, to broaden the exploits the loop discovers. On KernelBench, the loop drives the attack success rate from 62% to 0% on a held-out corpus of publicly reported exploits. We also find that weaker agents in the loop can defend against much stronger hackers: Gemini 3 Flash's loop drives the stronger Gemini 3.1 Pro and Claude Opus 4.7's attack success rate from 76% and 61% to 0% on KernelBench, and Gemini 3.1 Pro's from 39% to 17% on Terminal Bench across 77 tasks. We release Terminal Wrench (323 hackable environments, 3,632 hack trajectories) as a snapshot of the current attack surface, our patched verifiers, the exploits the loop discovered, and our implementation as a basis for future work.

Large language models often fail at simple counting tasks, even when the items to count are explicitly present in the prompt. We investigate whether this failure occurs because transformers do not represent counts internally, or because they cannot convert those representations into the correct output tokens. Across three model families, Pythia, Qwen3, and Mistral, ranging from 0.4B to 14B parameters, we find strong evidence for the second explanation. Linear probes recover the correct count from intermediate layers with near-perfect accuracy (R^2>0.99), showing that the information is present. However, the internal directions that encode counts are nearly orthogonal to the output-head rows for digit tokens (|cos|leq0.032). In other words, the model stores the count in a form that the digit logits do not naturally read out. We localize this failure with two interventions. Updating only the digit rows of the output head (36,864 parameters) substantially improves constrained next-token digit prediction (60.7 to 100.0% across four tasks), but it does not fix autoregressive generation. By contrast, a small LoRA intervention on attention Q/V weights (7.67M parameters) improves upstream routing and achieves 83.1% +/- 7.2% in true greedy autoregressive generation. Logit-lens measurements confirm the mechanism: the correct digit's vocabulary rank drops from 55,980 to 1, a 50,000x improvement. Additional norm, logit-lens, and cross-task analyses show that the bottleneck generalizes across character counting, addition, and list length, while remaining absent from broader multi-step reasoning benchmarks, including MMLU, GSM8K, and DROP. These results identify counting failure as a geometric readout bottleneck rather than a failure of internal representation: the model knows the count but the output pathway is geometrically misaligned with the tokens needed to express it.

Class-agnostic object counting aims to count all objects in an image with respect to example boxes or class names, a.k.a few-shot and zero-shot counting. In this paper, we propose a generalized framework for both few-shot and zero-shot object counting based on detection. Our framework combines the superior advantages of two foundation models without compromising their zero-shot capability: (i) SAM to segment all possible objects as mask proposals, and (ii) CLIP to classify proposals to obtain accurate object counts. However, this strategy meets the obstacles of efficiency overhead and the small crowded objects that cannot be localized and distinguished. To address these issues, our framework, termed PseCo, follows three steps: point, segment, and count. Specifically, we first propose a class-agnostic object localization to provide accurate but least point prompts for SAM, which consequently not only reduces computation costs but also avoids missing small objects. Furthermore, we propose a generalized object classification that leverages CLIP image/text embeddings as the classifier, following a hierarchical knowledge distillation to obtain discriminative classifications among hierarchical mask proposals. Extensive experimental results on FSC-147, COCO, and LVIS demonstrate that PseCo achieves state-of-the-art performance in both few-shot/zero-shot object counting/detection. Code: https://github.com/Hzzone/PseCo

We consider the task of mapping pseudocode to long programs that are functionally correct. Given test cases as a mechanism to validate programs, we search over the space of possible translations of the pseudocode to find a program that passes the validation. However, without proper credit assignment to localize the sources of program failures, it is difficult to guide search toward more promising programs. We propose to perform credit assignment based on signals from compilation errors, which constitute 88.7% of program failures. Concretely, we treat the translation of each pseudocode line as a discrete portion of the program, and whenever a synthesized program fails to compile, an error localization method tries to identify the portion of the program responsible for the failure. We then focus search over alternative translations of the pseudocode for those portions. For evaluation, we collected the SPoC dataset (Search-based Pseudocode to Code) containing 18,356 programs with human-authored pseudocode and test cases. Under a budget of 100 program compilations, performing search improves the synthesis success rate over using the top-one translation of the pseudocode from 25.6% to 44.7%.

Looped architectures provide an inductive bias toward learning step-by-step procedures for tasks that require compositional reasoning. The number of effective layers reached by looping determines the quality of the solution these models find. Like deep architectures, looped architectures are prone to a signal propagation problem induced by depth as the halting decision is postponed. In this paper, we address this signal propagation issue using pre-norm layers and residual scaling. Building on these architectural modifications, we propose FPRM, a Transformer-based Fixed-Point Reasoning Model that uses fixed-point convergence as an end-to-end halting mechanism in a looped architecture. We show that fixed-point halting allows FPRM to adapt its compute to task difficulty. FPRM is effective on common reasoning benchmarks, namely Sudoku, Maze, state-tracking, and ARC-AGI.

Looped transformers have demonstrated promising parameter efficiency by reusing layers for latent computation. Prior studies compare looped and non-looped models at matched parameters or per-token FLOPs. However, to the best of our knowledge, whether looping improves test-time scaling as outputs grow longer remains underexplored. Through post-training looped transformers, we study the accuracy-compute slope, measured as the accuracy gain per doubling of test-time decoding FLOPs. We find that existing looped transformers often yield steeper slopes than their non-looped baseline, yet underperform it at matched compute. While fixed-depth looping spends extra iterations on every token, our analysis shows that many tokens do not benefit from extra iterations. We therefore propose TaH2, which enables the model to focus extra iterations on the tokens that benefit from looping. It jointly post-trains the backbone and an iteration decider through lookahead depth supervision, which uses online labels indicating whether further iteration improves the prediction. TaH2 improves both the efficiency and attainable accuracy of test-time scaling. On challenging AIME benchmarks, TaH2 improves the accuracy-compute slope by 53% (2.74 vs. 1.79) over the non-looped baseline, exceeding the baseline's peak accuracy by about 3.4 points at matched test-time compute. As the maximum iteration depth increases, existing looped models largely plateau, while TaH2's gain over the non-looped baseline continues to grow from +2.8 points at depth 2 to +3.9 points at depth 8. Our code is available at https://github.com/thu-nics/TaH.